User manual GENIUS G-SHOT V1010

[. . . ] Federal Communications Commission (FCC) Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The slideshow will start from the 1st image in the current image storage. The slideshow will stop after the last image is displayed if the Slideshow Loop setting is Off or whenever you press the <Menu/OK> button. Setting the Slideshow Display Time Interval 1 2 Follow Step 1-4 of "Playback Images in Slideshow". Press <Menu/OK> button. 3 4 Press Up-arrow ( ) or Down-arrow ( ) button to adjust the interval from 5 to 30 seconds. Press Up-arrow ( ) button to select "START" to playback the slideshow. Setting the Single-loop/Endless-loop Slideshow 1 2 3 4 Follow Step 1- 4 of "Playback Images in Slideshow". Press the Up-arrow () or Down-arrow () button to set "ON" (Endless-loop) or "OFF" (Single-loop). Press Up-arrow ( ) button to select "START" to playback the slideshow. -13- English Playback on TV 1 Turn On camera. 2 Press the Up-arrow () or Down-arrow () button to select "SETUP" and press<Menu/OK> button. 3 Press Up/Down arrow (/) button to select "VIDEO OUT" and press<Menu/OK> button. 4 Set your video system format (NTSC or PAL). Note: For USA, Canada and Asian countries, please set to "NTSC". countries and China, please set to "PAL". For European 5 Connect the provided AV cable to the camera and the TV Video IN terminal. 6 7 Turn the TV on and set the TV input switch to Video In. The image will display on the TV screen. -14- English Display Image Properties This camera provides image property information, which includes: Image Quality & Resolution Image Filename Date & Time ISO Speed Shutter Speed Aperture Number Scene Mode EV Compensation Color Mode (if Vivid is applied) Sharpness Playback Button AF FLASH 1 2 Turn On camera. Press Playback ( ) button. LCD ON/OFF OK Press <Menu/OK> button and press down arrow () button to select "PICTURE INFO". 3 Press <Menu/OK> button to display. 4 5 Press Left-arrow ( ) or Right-arrow ( ) to navigate images. Press Playback ( ) button again to return Capture mode. -15- English Deleting Images Deleting Single Image in QuickView Menu/OK Button Playback Button Delete Button AF FLASH 1 After a picture is taken, the image will have a QuickView. Press Down-arrow ( ) or Up-arrow ( ) to select "RESOLUTION". 3 4 Press <Menu/OK> button to enter the submenu. Press Up-arrow ( ) or Down-arrow ( ) button to select. 5 Press <Menu/OK> button to apply the setting. -20- English Setting Image Quality This camera can set up the compression ration of JPG image. The best Image Quality is selected, the less image ratio is compressed but more image capacity will be occupied the memory. Three optional modes-- Best ( ), Better ( ) and Good ( ) are offered. 1 2 Press the <Menu/OK> button. Press <Menu/OK> button. 3 Press UP/Down arrow ( / ) button to setup the quality mode. Press the <Menu/OK> button. Setting Exposure Compensation 1 2 3 4 Press the <Menu/OK> button. Press Up-arrow ( ) or Down-arrow ( ) button to select "EV COMPENSATION". Press the <Menu/OK> button. Press <Menu/OK> button to setup. Setting White Balance This camera provides Auto (no icon), Sunny ( ), Cloudy ( Fluorescent ( ) for White Balance settings. Press Up-arrow ( ) or Down-arrow ( ) button to select "WHITE BALANCE". Press <Menu/OK> button. Press Up-arrow ( ) or Down-arrow ( ) button to select the white balance settings. Press <Menu/OK> button to apply the setting -21- English ISO Speed 1 2 3 4 5 Press the <Menu/OK> button. [. . . ] (Note: Please keep the CD inside the CD-ROM drive after restarting the computer. Remove the CD after all applications are successfully installed. ) -32- English Custom Installation The custom installation allows individual selection of the software provided on the CD. From the previous Installer Menu select "Custom Installation" and click "Next". The following screen will appear: 1 2 3 Check the desired application(s) and click "Next" to continue the software installation. [. . . ]