User manual GENIUS G-SHOT P713 MP3

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] For other settings like Language, Power Off time or others, choose [Setup] in Capture/Video/Playback menu. -33- English MOVIE MODE Using [ ] Movie mode allows you to record video clips at a resolution of 320 x 240 pixels. ] NOTE In [ ] Movie mode, resolution/quality, self-timer cannot be set or activated. ] Flash off. In [ ] Movie mode, the flash mode is automatically set to [ To set [EV] or [White Balance], you may use the [Video] menu. IMAGE PLAYBACK In [ ] Playback mode, you can view, magnify your images or play video clips back. This mode even provides thumbnail images display and slide show, allowing you to quickly search for the image that you want or play the images back one by one automatically. Single Image Playback Play back still images one at a time. -34- English 1. Press the MODE button twice to enter [ ] Playback mode. The last recorded image appears on the LCD monitor. 2. View and select your recorded images by using the / button. button. To view the previous image, press the To view the next image, press the button. NOTE To exit [ ] Playback mode, press the MODE button. ] print indicator only appears on the LCD monitor when the image is set to print The [ out. If there is no image stored in the internal memory or on the memory card, [No Image] message will appear on the LCD monitor. During playback, the recorded image appears to be larger than the one on preview in capture mode. Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. Press the MODE button twice to enter [ ] Playback mode. The last image frame appears on the LCD monitor. View and select your images by using the / button. -35- English 3. Enlarge the image by pressing the OK button. 5. Use the / / / button to select the area to enlarge. To return to the regular display from 4X-enlarged status, press the OK button. NOTE Each press of the OK button, the modes switch cyclically: 1X 2X 3X 4X 1X. Viewing Nine Images At A Time This function allows you to view nine thumbnail images on the LCD monitor simultaneously so that you can quickly scan for a particular image. Press the OK button and nine thumbnail images appear on the LCD monitor. Use the / / / button to move the cursor to select the image to be displayed at regular size. -36- English 6. Press the OK button to display the selected image on the full screen. Viewing Video Clips To view the recorded video clips, follow the steps below: 1. ] Automated Playback (Slide Show) Slide show function enables you to play your images back automatically in sequential order as a slide show. This is a very useful and entertaining feature for reviewing recorded images and for presentations. Press the MODE button twice to enter [ button to enter the Playback menu. Set the playback interval by using the / button and press the OK / button then press the OK button to enter button to confirm. The slide show starts displaying your images on the LCD monitor, one by one, with the interval that you set. To stop the slide-show display, press the OK button. NOTE To not set automated playback (slide show) you may press the MENU button to exit. Protecting Images This feature allows you to prevent recorded images from being accidentally erased. Press the MODE button twice to enter [ MENU button to enter the Playback menu. You can select to protect single image or all images at one time by using the button , and press the OK button. [. . . ] Turn off the LCD monitor to reduce power consumption. Setup Menu (in Capture/Video/Playback Menu) You can select according to your preference for the camera settings in Setup of Capture/Video/Playback Menu. Navigate the options you wish to configure by using the / button. -61- English Date/Time This sets the date and the time. Refer to the section in this manual titled "Setting the Date and Time" for further details. Format This utility formats the internal memory (or memory card) and erases all stored images and data. Refer to the section in this manual titled "Formatting an SD Memory Card or Internal Memory" for further details. Beeper Specify whether or not beeps are to be generated when buttons are pressed. [. . . ]