User manual GENIUS E5000

[. . . ] You can connect the receiver to a USB port of a PC Install two AA batteries in the mouse. 3. 4. Turn on your computer. After you open Windows, please press the button on the receiver first and then press the button under the mouse for channel setting. [. . . ] When you use Wireless optical mouse on a desk that is made of metal, try using a pad and reduce the receiving distance. Before the first installation is completed (channel setting ready), the mouse will not work. The Wireless optical mouse channel provides 256 ID-codes, and it automatically selects the ID # for your mouse. But if you have additional Wireless optical mouse sets in an area of 10 square meters, more interference will occur between the receiver and your mouse. 1 2. 3. 4. If you feel the mouse does not move smooth as usual, then the batteries have lost their charge, so please replace them. Also, the wireless icon will be blinking "red" when there is a battery-low situation. The LED on the receiver shows the battery-recharging status (from shining to LED completely "on" for battery full). 5. 6. You should set up the channel every time you replace the batteries. If you need to buy new batteries, please choose Ni-MH (Nickel-Metal-Hydride) AA batteries, 1. 2V, 1300 to 1600 mAH. Please do not mix or use other types of batteries (Li-ion, Ni-Cd, Alkaline, etc. ) The Wireless optical mouse with radio frequency gives you free movement and an enjoyable experience. [. . . ] Forward: Go to next page when viewing the Internet WWW: Open browser (Netscape or IE) Play & Pause: Play and pause of audio or video CD's Vol. Application Switch: You can switch between active programs and documents 3 [. . . ]