User manual GENIUS DVB-T31

[. . . ] TV/AV Switches between TV or AV mode. Display position bar on the screen to adjust POSITION the antenna or for manual search. UHF Switches to UHF tuning mode. 2 - English Figure 2: Front Panel KEY POWER/ Power ON/OFF Function Move left or right on the menu by selecting 1. 4. Rear Panel Main connection (AC 90~240V) Digital audio output Connect to a speaker Connect to TV and VCR or PC using scart cable Connect to a PC for software upgrade Ant. OUT: connect to another receiver 3 - English Installation This section explains the installation of TVGo DVB-T31 Always refer to the manual supplied with the equipment for the installation of outdoor equipment such as the antenna. [. . . ] You can also protect your installed data and information using the Install Lock. Warning: Once you change the password, please keep it in a safe place · How to use Parent Lock TV channel Manager Page. To activate parent lock function, go to the · How to use Install Lock Enter the current password. 1. Note: Default password is 0000 Warning: Do not forget your password 2. 4. Factory Default If you want to return TVGo DVB-T31 to factory default, select Factory Default and press the OK key. Warning: On selecting factory default you will lose all of data and information, which was previously installed. 2. 5. Previous Channel Recall Press PR key on the remote control to move to the previous channel you watched. 2. 6. TV & Radio Mode While viewing a TV channel, press the TV/RADIO key on the remote control to change between TV and Radio modes. 8 English 2. 7. TV & VCR Mode The TV/AV key on the remote control lets you change the mode from satellite to TV or VCR. Press twice to move to VCR mode. General Function The following describes the basic functions of TVGo DVB-T31 when watching terrestrial TV or listening to terrestrial radio. While watching, the current channel information will be shown on the bottom of the screen if you press the INFO button on the Remote control. 2. 8. Select Channel If you want to select channel, use CH key on the front panel or PR+, PR- key on the Remote Control or numeric keys. In addition to the above function, TVGo DVB-T31 provides more convenient channel change functions. To select a channel, go up or down on the channel list and place the cursor on a desired channel. Then, press OK key to watch the selected channel. Channel Information Every time you change channels, you will receive program information for a few seconds. While watching the channel you can see the current channel information at anytime by pressing the INFO key on the remote control. Volume Control To increase or decrease volume, use VOL Keys on the remote control or on the front panel. Note: TVGo DVB-T31 has 18 volume levels and this can be controlled from the volume level of your TV. To bring back To mute the sound, press the normal sound, press this key once again. Audio Control key repeatedly to select one of three possible Audio settings Press the (Left, Right and Stereo) The current audio setting will be displayed in the channel information 4. Language Selection Press the AUDIO key on the remote control repeatedly to select audiolanguage. Favourite List To create a favorite group list press FAV key on the remote control. [. . . ] To see the EPG data, press EPG key on your remote control when watching a channel or select Program Guide in the Main Page. You can see the channel in the PIG screen; channel list on the left side and Program schedule for selected channel will be displayed on the right side. The time related to the program schedule is also displayed Select one channel and placing the mark on the time of Program name which detail information you want to know. Then you can see blue button, if there is detail information of the channel. [. . . ]