User manual GENIUS DV813

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Select this mode when capturing images in a reduction Flash off place where flash photography is prohibited, or when the distance to the subject is beyond the effective range of the flash. Use this mode for photographing under Forced Flash artificial light such as backlighting, fluorescent lighting, etc. NOTE The flash cannot be used in Movie Mode. Using the Self-Timer Using the self-timer you can join into the scene when taking group shots. Make sure the digital video camera is in -35- English Capture Mode. button Each press of the moves the icon one step through the sequence and displays it on the screen. OFF 10 sec. 3 sec. 3. Compose the image, and then press the button. While the self-timer is activating, the blinks. The Self-timer LED flashes and the image will be captured after the preset time has elapsed. or con displayed on the screen The table below will help you choose the appropriate self-timer mode: Self-timer mode Description The image is captured about three seconds after the 3 seconds-delay shutter button is pressed. The image is captured about ten seconds after the shutter button is pressed. The Self-timer LED starts 10 seconds-delay blinking relatively slow for 7 seconds and then blinking rapidly for the last 3 seconds. -36- English NOTE The self-timer does not function in Movie Mode. The self-timer setting is automatically cancelled after an image is captured. Continuous Capture This function allows you to capture a sequential burst of three images with one press of the shutter button. The continuous capture mode is very useful for photographing objects in motion where it is difficult to determine the precise moment of capture. Afterwards, you may review the sequence of shots to select the best one. Compose the image, and then press the NOTE Continuous capture cannot not be activated while the image resolution is set to 8MP or 6MP. In continuous capture mode, the flash cannot be used. -37- English PLAYBACK MODES Video Playback You can play back video clips recorded on the digital video camera. Slide the Mode switch to the Press the side. button continuously until the Movie/Still-image Playback Mode appears. button to play the selected Press the video clip. To pause playback at any time, press the button again. To stop playback, press the button. NOTE To adjust the volume of those videos that include audio, press the increase the volume, press the button to decrease the volume. button to -38- English Still-Image Playback You can view your still-images, enlarge them for detailed viewing, or run a slide show. Make sure the digital video camera is in Movie/Still-Image Playback Mode. Select the desired video clip/image with the Pressing the / / buttons. buttons during still-image playback will result in a 90 degree button rotates the image clockwise and displays it, rotated display. The whereas the button rotates the image counterclockwise and displays it. A press of the button opposite to the direction in which the image was rotated will return the image to the normal display. Playing Back Videos and Still Images on a TV Monitor You can also play back your videos and images on a TV screen. [. . . ] For Windows 2000/XP users, please make sure to install and use the VideoStudio in "Administrator" mode. VideoStudio is not supported on the Mac. -64- English CONNECTING THE DIGITAL VIDEO CAMERA TO OTHER DEVICES -65- English SPECIFICATIONS Item Image sensor Description 4 Mega pixels CCD Sensor 3350 x 2482 pixels (8MP, by interpolation) 2880 x 2160 pixels (6MP, by interpolation) 2320 x 1728 pixels (4MP, native resolution) 2048 x 1536 pixels 1600 x 1200 pixels 640 x 480 pixels VGA 640 x 480/QVGA 320 x 240 SUPER FINE/FINE/NORMAL 2. 0" Color TFT LCD Focal length: 7. 60 mm F-no: 3. 5/7. 0 8 MB internal memory SD memory card support (optional, up to 512 MB capacity) 3-seconds delay/10-seconds delay Equivalent to ISO 100/200/400/Auto (ISO 100 - ISO 400) 1x ~ 8x for Still-image playback mode 1x ~ 8x for Still-image and Movie (Video) capture mode Still image: JPEG Video: MPEG4 (ASF file) Audio: IMA-ADPCM NTSC/PAL Automatic/Red-eye reduction/Forced flash/Flash off +/- 1. 8 EV (in 0. 3 EV increments) AUTO, DAYLIGHT, LAMP, FLUORESCENT-1, Image resolution Video resolution Image/Video quality LCD monitor Lens Memory type Self-timer ISO sensitivity Digital zoom Compression format Video standards Flash Exposure compensation White balance -66- English FLUORESCENT-2, SHADE Power Rechargeable lithium-ion battery, NP-60/3. 7V (optional), AC power adapter, 5V/3A (optional) Headphone jack Interface A/V OUT terminal USB port (USB 2. 0/B-mini) DC IN 5V terminal Dimensions Weight Approx. 147g (without the battery & SD memory card) * Design and specifications are subject to change without notice. -67- English TROUBLESHOOTING Refer to the symptoms and measures listed below before sending the digital video camera for repairs. If the problem persists, contact your local reseller or service center. Power Supply Symptom The power does not come on. Cause The battery is not loaded. [. . . ]