User manual GENIUS DV611

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) (2) this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Adjust date and time by using the Up/Down buttons, and then select SET to validate each change. Select EXIT to leave Time Setting without any change. -27- English Submenu Time Setting Display Screen Time Setting Format Card Select Format Card by using the Up/Down buttons. Select YES or NO by using the Up/Down buttons. Submenu Format Card Options Display Screen Format Card Options YesFormat the SD Card / built-in memory No (Default)Do not format SD Card / built in memory TV System Select TV System by using the Up/Down buttons. Ensure that the appropriate TV standard of your area is selected ­ either NTSC or PAL. -28- English Wrong TV system setting may cause image flicker. PAL standard: UK, Europe, China, Australia, Singapore and Hong Kong etc. Submenu TV System Options Display Screen TV System Options Selecting Interface Language Select Language by using the Up/Down buttons. Submenu Language Options Display Screen Language Options This option allows you to select the language for the menus and the text display on the LCD monitor. Default Setting To restore the default factory setting, select this option. -29- English Select Default Setting by using the Up/Down buttons. Select YES or NO by using the Up/Down buttons. Submenu Default Setting Options Display Screen Default Setting Options Flash (Picture Record Mode Only) This Digital Video Digital Video Camera has two flash settings. Change the flash setting with either the hot key (Right button) or Option Setting. Auto-flash( )the flash fires automatically according to lighting conditions. Use this mode for general photography. Use this mode when taking images in a place where flash photography is prohibited, or when the subject is distant (beyond the range of the flash). In Picture Record Mode, press the Enter button to switch to menu screen. -30- English 2. Use Up/Down buttons to select Flash, then press the Enter/Right buttons to switch to flash submenu. Press the Enter button to validate the setting and exit. NOTE The flash will be disabled automatically when battery power is low ( ) Flash Flash Options Enter Button Self-Timer (Picture Record Mode Only) The self-timer allows you to take pictures with a ten-second time delay. To activate the Self-Timer with either the hot key (Left button) or Option Setting. The self-timer LED on the front of the Digital Video Digital Video Camera beneath the flash light will also blink. The speed of blinking will increase just before the picture is taken. -31- English Self-Timer Selt-Timer Option Enter Button Multi-Snap (Picture Record Mode Only) With the Digital Video Digital Video Camera set to Multi-Snap Mode, you can take five continuous pictures. Multi-Snap Multi-Snap Option Enter Button Night Mode (Picture Record Mode Only) Use Night Mode for night scenes or low light conditions. A longer exposure captures more detail of background subjects. -32- English Display Screen Night Mode Option Enter Button NOTE To avoid blurry pictures, place the Digital Video Digital Video Camera on a flat, steady surface, or use a tripod. AE Metering (Picture Record Mode Only) There are three settings which are Multi segment, Center-weighted, Spot AE Metering. Center-Weighted: The exposure is determined mainly by the center of the screen. Spot: The exposure is determined by the small area in the center of the screen. -33- English Display Screen AE Metering Option Enter Button Two in One (Picture Record Mode Only) With Digital Video Digital Video Camera set to Two in One mode, you can combine two snapshots into one picture. -34- English Display Screen Two in One Option Enter Button -35- English Section 4 Playback Mode Press REC/PLAY button to switch from Record Mode to Playback Mode. The Playback Mode is for viewing and managing movies and pictures as well as listening to voice and music on the built-in memory or on an optional memory card. Operation Press REC/PLAY button to switch from Record Mode to Playback Mode Main Menu. There are four options in the Playback Mode, movie, picture, voice, and music. A folder icon will be shown if there is any movie, picture, voice, or MP3 file stored. Press the Enter button to view movies/pictures or listen to voice/music. Display Screen -36- English Button Functions The direction buttons have the following functions in Movie and Picture Playback Modes. [. . . ] Insert the CD-ROM that came with the Digital Video Camera into your CD-ROM drive. After the driver installation is completed, restart your computer. -59- English Step2: Connecting the Digital Video Camera to Your Computer 1. Connect one end of the USB cable to an available USB port on your computer. Connect the other end of the USB cable to the USB connector on the Digital Video Camera. [. . . ]