User manual GENIUS DV610

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) (2) this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Select YES or NO by using the Up/Down buttons. Submenu Format Card Options Display Screen Format Card Options YesFormat the SD Card / built-in memory No (Default)Do not format SD Card / built in memory TV System Select TV System by using the Up/Down buttons. Ensure that the appropriate TV standard of your area is selected ­ either NTSC or PAL. PAL standard: UK, Europe, China, Australia, Singapore and Hong Kong etc. -26- English Submenu TV System Options Display Screen TV System Options Selecting Interface Language Select Language by using the Up/Down buttons. Submenu Language Options Display Screen Language Options This option allows you to select the language for the menus and the text display on the LCD monitor. -27- English Default Setting To restore the default factory setting, select this option. Select YES or NO by using the Up/Down buttons. Submenu Default Setting Options Display Screen Default Setting Options Flash (Picture Record Mode Only) This Digital Video Digital Video Camera has two flash settings. Change the flash setting with either the hot key (Right button) or Option Setting. Auto-flash( )the flash fires automatically according to lighting conditions. Use this mode for general photography. Use this mode when taking images in a place where flash photography is prohibited, or when the subject is distant (beyond the range of the flash). -28- English To change the Flash setting: 1. In Picture Record Mode, press the Enter button to switch to menu screen. Use Up/Down buttons to select Flash, then press the Enter/Right buttons to switch to flash submenu. Press the Enter button to validate the setting and exit. NOTE The flash will be disabled automatically when battery power is low ( ) Flash Flash Options Enter Button Self-Timer (Picture Record Mode Only) The self-timer allows you to take pictures with a ten-second time delay. To activate the Self-Timer with either the hot key (Left button) or Option Setting. The self-timer LED on the front of the Digital Video Digital Video Camera beneath the flash light will also blink. The speed of blinking will increase just before the picture is taken. -29- English Self-Timer Selt-Timer Option Enter Button Multi-Snap (Picture Record Mode Only) With the Digital Video Digital Video Camera set to Multi-Snap Mode, you can take five continuous pictures. Multi-Snap Multi-Snap Option Enter Button -30- English Night Mode (Picture Record Mode Only) Use Night Mode for night scenes or low light conditions. A longer exposure captures more detail of background subjects. Display Screen Night Mode Option Enter Button NOTE To avoid blurry pictures, place the Digital Video Digital Video Camera on a flat, steady surface, or use a tripod. AE Metering (Picture Record Mode Only) There are three settings which are Multi segment, Center-weighted, Spot AE Metering. Center-Weighted: The exposure is determined mainly by the center of the screen. Spot: The exposure is determined by the small area in the center of the screen. -31- English Display Screen AE Metering Option Enter Button Two in One (Picture Record Mode Only) -32- English With Digital Video Digital Video Camera set to Two in One mode, you can combine two snapshots into one picture. Display Screen Two in One Option Enter Button -33- English Section 4 Playback Mode Press REC/PLAY button to switch from Record Mode to Playback Mode. The Playback Mode is for viewing and managing movies and pictures as well as listening to voice and music on the built-in memory or on an optional memory card. Operation Press REC/PLAY button to switch from Record Mode to Playback Mode Main Menu. There are four options in the Playback Mode, movie, picture, voice, and music. A folder icon will be shown if there is any movie, picture, voice, or MP3 file stored. Press the Enter button to view movies/pictures or listen to voice/music. Display Screen -34- English Button Functions The direction buttons have the following functions in Movie and Picture Playback Modes. Up button : Invalid Down button: Information ON/OFF Enter button: Enter to movie, picture, voice, or music option menu. REC/PLAY button: Switch to movie/ picture Record Mode. Mode button: Go back to playback main menu. Tele-Wide button: Digital Zoom in and out. LCD Monitor Information Indicators on the LCD screen while in Playback Mode -35- English (1) Mode Indicator Movie Playback Mode Picture Playback Mode Voice Playback Mode Music Playback Mode (2) Resolution Indicator Movie : High / Standard/ Low Picture: High / Standard/ Low -36- English (3) Indicates the selected movie/picture is locked. Indicates the single movie/voice/MP3 is being repeated. Indicates all of the movies/voices/MP3s are being repeated. Indicates the slide show is playing. [. . . ] Insert the CD-ROM that came with the Digital Video Camera into your CD-ROM drive. After the driver installation is completed, restart your computer. -57- English Step2: Connecting the Digital Video Camera to Your Computer 1. Connect one end of the USB cable to an available USB port on your computer. Connect the other end of the USB cable to the USB connector on the Digital Video Camera. [. . . ]