User manual GENIUS DV601

[. . . ] English WEEE Warning Message Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. For more information, contact the retailer or the local authorities in charge of waste management. FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. [. . . ] You can activate Self-timer by either hot key (Left Button) or Option Setting. The self-timer LED on the front of the camera beneath the flash light will also blink. When in Camera Mode, use Up/Down Buttons to select Self-timer, then press Enter Button to switch to Self-timer submenu. Press Enter Button to validate the setting and exit. Display Screen Enter Button Self-timer Options -36- English Sharpness You can soften and sharpen images to achieve different effects. When in Camera Mode, use Up/Down Buttons to select Sharpness Option, then press Enter Button to switch to Sharpness submenu. Use Up/Down Buttons to select Sharpness then press Enter Button to switch to Sharpness submenu. Press Enter Button to validate the setting and exit. Display Screen Change Sharpness Setting Enter Button White Balance The camera adjusts the color balance of images automatically. Three manual white balance settings are available: -37- English 1. In Movie/Picture Record Mode, press Enter Button to switch to record menu screen. Use Up/Down Buttons to select White Balance, then press Enter Button to switch to White Balance submenu. Press Enter Button to validate the setting and exit. Display Screen Enter Button W/B Option -38- English Multi-Snap (Picture Record Mode Only) With the camera set to Multi-Snap Mode, you can take five continuous pictures. When in Camera Mode, use Up/Down Buttons to select Multi-Snap, then press Enter Button to switch to Multi-Snap submenu. Press Enter Button to validate the setting and exit. Display Screen Multi-Snap Option Enter Button Backlight (Picture Record Mode Only) With the camera set to backlight Mode, you can take shots when bright light is behind the subject. When in Camera Mode, use Up/Down Buttons to select Backlight, then press Enter Buttons to switch to Backlight submenu. Press Enter Button to validate the setting and exit. Display Screen Backlight Option Enter Button Date Printing (Picture Record Mode Only) To enable Date Printing: 1. When in Camera Mode, use Up/Down Buttons to select Date Printing, then press Enter Buttons to switch to Date Printing submenu. Press Enter Button to validate the setting and exit. -40- English Display Screen Date Printing Option Enter Button NOTE Date would be shown on the printed picture once date printing is enabled. Voice Mode To enable voice recording: 1. In Movie/Picture Record Mode, press Enter Button to switch to record menu screen. Choose Enter option to enable voice recording and press Enter Button to validate the setting and exit. -41- English Display Screen Voice Mode Option Enter Button Effect Setting There are four modes which are Normal, Black/White, Classic and Negative. In Movie/Picture Record Mode, press Enter Button to switch to record menu screen. Press Enter Button to validate the setting and exit. -42- English Display Screen Setting Menu The Setting submenu contains options for configuring your camera set up. In Movie/Picture Record Mode, press Enter Button to switch to record menu screen. [. . . ] Windows NetMeeting) NOTE Video conferencing (or video editing) software is not included with the Digital Video Camera. -88- English General System Requirements for Videoconferencing To use the Digital Video Camera for videoconferencing, your computer system must include: Microphone Sound card Speakers or headphones Network or Internet connection Step1: Installing the PC Digital Video Camera Driver The PC-Digital Video Camera driver included on the CD-ROM is exclusively for Windows. The PC Digital Video Camera function is not supported for Mac platforms. Depending on your operating system, you may have to restart your computer after installing the driver. Step2: Connecting the Digital Video Camera to Your Computer 1. Connect one end of the USB cable to an available USB port on your computer. [. . . ]