User manual GENIUS DV5131

[. . . ] English WEEE Warning Message Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. For more information, contact the retailer or the local authorities in charge of waste management. FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. [. . . ] In Movie/Picture Record Mode, press Enter to switch to record menu screen. Use Tele/Wide Button to select Sharpness Option, then press Enter to switch to the Sharpness submenu. Sharpness Option Display screen Enter Button -25- English White Balance The camera adjusts the color balance of images automatically. In Movie/Picture Record Mode, press Enter to switch to record menu screen. Use Tele/Wide Button to select White Balance, then press Enter to switch to the White Balance submenu. Display screen W/B Option Enter Button Multi-Snap (Camera Mode Only) With the camera set to Multi-Snap Mode, you can take five continuous pictures. In Movie/Picture Record Mode, press Enter to switch to record menu screen. Use Tele/Wide Button to select Multi-Snap, then press Enter to switch to the Multi-Snap submenu. Press Picture shutter Button to take five continuous pictures. -26- English Display screen Multi-Snap Option Enter Button Backlight (Camera Mode Only) With the camera set to backlight Mode, you can take shots when bright light is behind the subject. In Movie/Picture Record Mode, press Enter to switch to record menu screen. Use Tele/Wide Button to select Backlight, then press Enter to switch to the Backlight submenu. Display screen Backlight Option Enter Button Date Printing (Camera Mode Only) To enable Date Printing: 1. In Movie/Picture Record Mode, press Enter to switch to record menu screen. Use Tele/Wide Button to select Date Printing, then press Enter to switch to the Date Printing submenu. -27- English 4. Display screen Date Printing Option Enter Button NOTE Date will be shown on the printed picture once date printing is enabled. Night Mode Use Night Mode for night scenes or low light conditions. Display screen Night Mode Option Enter Button NOTE To avoid blurry pictures, place the camera on a flat, steady surface, or use a tripod. -28- English Voice mode To enable voice recording: 1. In Movie/Picture Record Mode, press Enter to switch to record menu screen. Choose Enter option to enable voice recording and press Enter to validate the setting and exit. Display screen Voice Option Enter Button Effect Setting There are four modes: Normal, Black/White, Classic and Negative. In Movie/Picture Record Mode, press Enter to switch to record menu screen. Display screen -29- English Setting Menu The Setting submenu contains options for configuring your camera set up. In Movie/Picture Record Mode, press Enter to switch to record menu screen. [. . . ] If the problem persists, contact your local reseller or service center. Power Supply Symptom The power does not come on. Cause The battery is not loaded. The digital video camera was left unattended and unused, so auto power off cuts it off. Turn the power back on. The power cuts out during use. The power does not go off. Many images are being captured in dark places inside, requiring flash. [. . . ]