User manual GENIUS D612

[. . . ] English FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Press the Display button a second to display everything again. -22- English Photo mode Use Photo mode to capture still pictures and store them in internal memory or on an SD card. The camera is in Photo mode when the Photo mode icon is displayed. 3. 4. 1 Photo mode icons Use the following picture to familiarize yourself with the Photo mode icons and symbols. See the table below for a description of each icon and symbol. Icon 1 Description Indicates battery status. -23- English Icon 2 Description Displays the camera shaking icon. When this icon is displayed, you need to steady the camera to take a clear shot. Counter to display the number of avail-able shots using current settings. Zoom indicator shows the current zoom status graphically. 3 4 5 6 7 8 9 10 -24- English 3. 4. 2 Setting the flash There are two different flash modes. The current flash setting is shown by an icon. Icon Description Flash is turned off Automatic flash, fires only when needed. 3. 4. 3 Using the macro function The macro function enables you to capture images of subjects very close to the lens. To switch the macro function on, use the macro switch on he side of the camera. The macro function can be used in both Video mode and Photo mode. -25- English 3. 4. 4 Using the zoom function The camera is equipped with a 4x digital zoom. Press the NEXT button to zoom out from the subject (move away from it). The zoom status is indicated by the zoom bar on the left of the screen. The zoom ratio is also represented in figures under the zoom bar. 3. 5 Video mode Use Video mode to capture video and store it in internal memory or on an SD card. The camera is in Video mode when the Video mode icon is displayed. -26- English 3. 5. 1 Video mode icons Use the following picture to familiarize yourself with the Video mode icons and symbols. See the table below for a description of each icon and symbol. Icon 1 2 3 4 Description Indicates battery status. Memory indicator, SD card or internal memory. -27- English Icon 5 6 Zoom indicator shows the current zoom status graphically. Description Indicates zoom ratio. 3. 5. 2 Using the zoom function See "Using the zoom function" on 3. 4. 4. 3. 5. 3 Using the macro function See "Using the macro function" on 3. 4. 3 3. 6 Playback mode Use playback mode to review all the pictures and videos stored in your camera. 3. 6. 1 Playback mode icons Refer to the following picture to familiarize yourself with the Playback mode icons and symbols. -28- English Photo Playback Video Playback See the table below for a description of each icon and symbol. Icon Description Indicates that the displayed image can be zoomed and moved. Current photo number/total number of photos and videos on internal memory or current memory card. Shows whether current video is paused, playing, being fast-forwarded, or rewound. -29- 1 2 3 4 5 English Icon 6 Description Shows the total length of the video when paused, or the current position when playing back. The circle moves from left to right as the video plays. 7 3. 6. 2 Viewing pictures and videos To view pictures and videos: 1. Use Prev/Next to move through the image and video files stored in memory. To play videos: ­Press the shutter button to play videos ­Press the shutter button again to fast forward through the video ­Press the shutter button again to pause the video. 3. 6. 3 Displaying file information Basic information is displayed by default on each image or video when viewed in Playback mode. Press the display button a second time to remove all file information from the screen. Press the button a third time to display basic information again. -30- English Note: Video files only show basic information. Pressing the display button will remove the information from the screen. Pressing the button again will restore it. 3. 6. 4 Using thumbnail mode By default, each image is displayed full size in playback mode, but you can display six thumbnail images on screen. [. . . ] You can treat this digital camera as an SD device You will only need to install a driver for the camera if your operating system is Windows 98SE. Windows XP/ME/2000 are plug and play operating systems and do not require a driver to be manually loaded. When the driver has been installed and the camera is connected, the camera memory and any installed mini SD card will appear as Mass Storage in Windows Explorer. Files can be dragged and dropped in the same way as on an ordinary disk. 5. 1. 2 PC camera You will need to install a driver for the camera to use as a PC or Web Cam in all Windows operating systems (Windows XP/ME/2000/98SE). [. . . ]