User manual GENIUS A11MCE

[. . . ] Turn on the power only after the TVGo A11MCE has been firmly and securely plugged into the PCI slot. (It is auto boot enable configuration, if you want to disable the auto boot function, please change to pin 1-2 close to disable the auto boot function). Connect the DVD Player or Video Recorder's video output to "VIDEO IN". Connect the video tape recorder's audio output to the "AUDIO IN". Caution: Please take special care on the Remote sensor cable, don't plug in or remove the sensor cable while the PC system is in Power on state. [. . . ] (Click "Browse" to select different folder if are using a different directory. ) 8. (Click "Browse" to select different folder if are using a different directory. ) 11. Click "Finish" to end the Teletext installation. 9 English 13. Click "Finish" button to end TVGo A11MCE InstallShield Wizard. Chapter 4: Device Driver Installation for Windows XP Media Center Edition 2005 1. Insert TVGo A03MCE CD into CD-ROM, Setup menu will pop up, click "Setup Utility for Win XP MCE" 10 English 2. Click "Next" button to start TVGo A11MCE installation wizard. 3. (Click "Browse" to select different folder if are using a different directory. ) 4. Now start to install the MCE encoder, please follow the installation wizard to continue. (Select "Change" if you want to use a different destination to save the MCE encoder) 11 English 6. Since it's ready to install, click "Install" to start. 7. Now you're ready to install the MCE decoder, click "Install" to start. 9. (Select "Change" if you want to use a different destination to save the MCE encoder) 12 English 10. Ready to install and copy files; click "Next" to start. 12. Click "Finish" to finish the MCE decoder installation. 13. Select "Yes, I want to restart my computer now. " And click "Finish" to reboot your computer. 13 English 14. After rebooting the PC, the "Found New Hardware Wizard" window appears. Select "No, not this time" and click "Next" to continue. 15. Select "Install from a list or specific location (Advanced)" and click "Next" to continue. 16. Type "[CDROM]:\Drivers\WinMCE" to select the file location and click "Next" button. ([CDROM] is the letter for the CD/DVD-Rom in your computer, it could be different letter in your computer) 17. Click "Continue anyway" to continue the installation. 14 English 18. Go to "Device Manage" and click "sound, video and game controllers" and you will see "TVGO A03MCE" on the list. [. . . ] For detailed operation, refer to the "Playback Setting" page. 6 Browse Image: Launch image browse window and browse the snapshot or saved image in your computer. For detailed operation, refer to "Image Browse" page 7 Step Backward: To reverse play video 8 Step Forward: To forward play video 9 Slow Backward: To slow reverse play video 10 Slow Forward: To slow forward play video file 11 Play/Pause: Click to play the current video file, click again to pause, click once more to continue play 12 Fast Backward: To fast reverse play video file 13 Fast Forward: To fast forward play video file 14 Mute: To close sound, click again to restore. Aim the front of the Remote Control at the IR cable and press the control buttons as you would on the infrared ray receiver. 5. 1 Installing Batteries Open the back cover of the remote controller and put in two AAA batteries (alkaline battery recommended). 28 English 5. 2 Remote controller functions: Windows 2000/XP function key: 1. [. . . ]