User manual GENI ELECTRONICS DISCO STROBE FL-045B
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GENI ELECTRONICS DISCO STROBE FL-045B. We hope that this GENI ELECTRONICS DISCO STROBE FL-045B user guide will be useful to you.
 |
GENI ELECTRONICS DISCO STROBE FL-045B : Download the complete user guide (15 Ko) |
Manual abstract: user guide GENI ELECTRONICS DISCO STROBE FL-045B
Detailed instructions for use are in the User's Guide.
[. . . ] Disco Strobe(FL-045B)
Introduction Congratulations on purchasing a GENI strobe light. [. . . ] Features Speed control Synchronous operation of multiple units with the FL-01C controller (sold separately). Signal jacks To run units synchronousely, connect FL-OIC controller to the strobe light using a '/4" mono cable, and use the second signal jack to connect to additional units using '/4" mono cables. Before opening unit covers, make sure that the unit is cool and not connected to power source. Remove the front lens by loosening the nuts located on either side of the lens. [. . . ] If you do touch the glass with bare hands, clean it with alcohol using a cotton ball or soft cloth. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GENI ELECTRONICS DISCO STROBE FL-045B
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GENI ELECTRONICS DISCO STROBE FL-045B will begin.