User manual GENELEC DI8

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GENELEC DI8. We hope that this GENELEC DI8 user guide will be useful to you.


GENELEC DI8 : Download the complete user guide (313 Ko)

Manual abstract: user guide GENELEC DI8

Detailed instructions for use are in the User's Guide.

[. . . ] DI8A Operating Manual Genelec DI8A Active Balancer Description The Genelec DI8A Active Balancer is designed to convert an unbalanced line signal to a balanced line signal, thereby reducing its susceptibility to electronic interference. One of the channels has duplicated outputs, providing easy connection for twin subwoofers in large systems. [. . . ] Do not place any objects filled with liquid, such as vases on the DI8A or near it. No naked flame sources, such as candles, should be placed on the DI8A. Servicing and adjustment must only be performed by qualified service personnel. Opening the DI8A is strictly prohibited except by qualified service personnel. Failing to do this may lead to personal injury. Installation We recommend that you install the DI8A close to the signal source, so that you can keep the unbalanced input lines as short as possible. The DI8A can be attached into a 19" rack using the rack ears included in the kit or placed on a shelf. Before connecting any cables, ensure that all equipment is powered down and the mains voltage selector on the left side of the DI8A has been set to your local mains voltage. Connect the unbalanced signal cables from the program source to the RCA input connectors on the back panel of the DI8A and the balanced output cables from the correspondingly numbered XLR connectors on the DI8A to the active speakers or power amplifiers. This allows connecting two subwoofers to the LFE channel of a surround sound system. Gain adjustment The +6 dB gain adjustment feature allows the user to increase the output level from the DI8. This may be needed if the output from the main preamp/processor is found insufficient to drive the system loudspeakers to their full output capability. This situation should occur rarely though, and the feature should not be used unless sure that maximum gain has been reached on the main preamp/processor. The +6 dB gain setting can be selected separately for each of the eight channels using the "GAIN" switches located on the front panel. [. . . ] Phone +1 508 652 0900 Fax +1 508 652 0909 Email genelec. usa@genelec. com In China please contact: Beijing Genelec Audio Co. Jianwai SOHO, Tower 12, Room 2306 39 East 3rd Ring Road Chaoyang District, Beijing 100022, China Phone +86 0 5869 7915 Fax +86 10 5869 7914 In Sweden please contact: Genelec Sverige Box 5521, S-141 05 Huddinge Phone +46 8 449 5220 Fax +46 8 708 7071 Email info@genelec. com International enquiries: Genelec, Olvitie 5 FIN-74100, Iisalmi, Finland Phone +358 17 83881 Fax +358 17 812 267 Email genelec@genelec. com [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GENELEC DI8




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GENELEC DI8 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.