User manual GEHA OFFICE X15 CD

[. . . ] ImPorTaNT NoTEs oN safETy Please read the user manual carefully and in its entirety before commissioning the file shredder. When using electric devices, always take basic precautions to eliminate any risk of injury. This file shredder has been designed specifically for the shredding of paper and CDs. Do not attempt to feed foils, adhesive labels, clothing, or plastic materials into the file shredder. [. . . ] Once all paper has been shredded and no additional paper is fed into the machine, the device stops automatically (Standby Mode). An automatic reverse and stop function prevents a paper jam when the device is overloaded with too much paper in the feeder. Should a paper jam occur, remove all paper from the feeder and wait until the device has finished its automatic cleaning process and has stopped operating. `fWD` If you place a narrow piece of paper (< 10 cm) into the feeder sideways, then the photoelectric barrier may not detect it and thus not start the device automatically. In this case, press and hold the button `FWD` until the paper has been drawn in completely. `rEv` By pressing the button `REV`, you can initiate the reverse operation of the cutting mechanism in case of a paper jam. When the sensor detects that the waste paper container is full, the device stops automatically and the red LED `Status' lights up, and the LCD display will show `Basket Full'. First remove all paper from the feeder, and then empty the waste paper container. Feeding cDs/DvDs and credit cards into the shredder This device can also shred CDs/DVDs and credit cards. Make sure that only 1 CD/DVD or 1 credit card is fed into the device at a time!The green LED `Status' lights up, and the operating mode (Ready) and current time are shown in the LED display. Any CDs/DVDs and credit cards in the slot are detected automatically, the device starts up and the operating mode `In Use' is shown on the LCD display. Make sure to keep your face well away from the feeder slot when shredding CDs/DVDs, since these types of material always pose a hazard of splintering!Remove the shredded material before changing the to a different medium in order to facilitate an environmentally friendly disposal!By pressing the button `FWD`, you can now increase the hour displayed, and by pressing the button `REV` you can decrease the hour displayed. By pressing the button `FWD`, you can now increase the minutes displayed, and by pressing the button `REV` you can decrease the minutes displayed. Important note: The device will switch off automatically if the motor temperature increases too much. The LED `status' lights up in red and signals that the overheat protection of the device has been activated - the LcD display shows `Please Wait'. If that is the case, the device will not react when you press the button `rEv' or `fWD'. The device switches back into normaloperation as soon as the motor has cooled sufficiently. [. . . ] If the device is still not working after you have tried the above solutions, please remove the mains power plug from the wall socket and consult your retailer. DIsPosaL The symbol depicting a crossed-out rubbish bin means that electrical devices may not be disposed of with regular household waste. please bring the device to an approved recycling centre for environmentally firendly disposal. Make sure to keep both your proof of purchase and the original packaging. [. . . ]