User manual GARMIN STREETPILOT 2610 GPS

[. . . ] StreetPilot 2610/2650 portable car navigation owner's manual StreetPilot 2610 pictured StreetPilot 2650 not shown Copyright 2004, 2005 Garmin Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U. K. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. [. . . ] In the example at right, numerous stops have been added to a trip to the Kansas Speedway. If you have a definite order for the places you would like to visit, you can arrange the order by highlighting a via point and moving it up or down by using the up/down arrows on the Edit Vias page. Thus, if you wish to make Olathe J second on your route, move it accordingly, as shown at right. Note that you can also change the final destination (Kansas Speedway) by manually moving a via point into the final position that displays the blue checkered flag. To create a route through all via points that is optimized for distance, simply select Auto Arrange from the Edit Vias page (as shown at right). . A window appears that asks if you also want your destination point to be reordered. Answer Yes, and the unit arranges all of your stops, including the destination point. Answer No, and the unit arranges all of your stops EXCEPT the destination point. Reference Creating Routes Once you find the location that you would like to add (by using Use Map or Find), select the location, and information about it will appear. Select Add As Via, and the location will appear as a via point, shown below. Deleting Via Points If you decide that you no longer want to visit one of your via points, simply touch that point to reveal information about the selected via point. Select Remove and then select Yes to verify, and the via point will be removed from your route. When you opt to have the StreetPilot auto arrange your via points, a window will appear that will ask you if you want your destination point to be reordered. If you answer yes, your destination point will be reordered, but only if doing so creates the shortest route. 35 Reference Measuring Distances Measuring Distances Between Two Places You can get an idea of how far two points are from each other by using the Measure Distance feature. To measure the distance between two points, make sure you are currently viewing the Map page. An on-screen pointer (a blue thumb tack) at your current physical location (or current point) will appear on the Map page. In our example below, the current location is the Midland Theater. Item under your map pointer Distance and direction from the thumb tack to the map pointer . Coordinates of your map pointer You can use the Measure Distance feature to do straight-line distancing for places that are miles away from your current location. In the example above, the current location is Olathe, Kansas, and the new point is Albuquerque, New Mexico. Touch a point anywhere on the Map page. A dotted line that extends from the on-screen pointer to your new point will appear: The new location, the Bistro, is . 1 miles and 244 from the thumb tack. The coordinates of the new location you selected (the Bistro). 36 To move the thumb tack to the new location (Bistro), touch the check mark at the top right of the Map page. The on-screen pointer (blue thumb tack) will appear at the new location. In our example below, then, the Bistro becomes the current point. Reference Measuring Distances The Measure Distance feature provides general information and measures distances in a straight line. It is best used if you are in an area where no roads are available. You can measure distances from the Bistro to other locations: To stop measuring points, press the MENU key and then select the Stop Measuring icon. Or, simply touch the white arrow in the top left side of the Map page. 37 Reference Customizing your StreetPilot 2610/2650 If you've experimented with creating routes and finding places using your StreetPilot, you may feel you're ready to customize it to suit your navigational needs. [. . . ] You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software of any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America. 78 This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. [. . . ]