User manual GARMIN GPSMAP 492

[. . . ] Owner's Manual GPSMAP 392/398 GPSMAP 492/498 chartplotter receiver GPSMAP 498 shown © Copyright 2006 Garmin Ltd. Garmin Corporation Unit 5, The Quadrangle, Abbey Park Industrial Estate, No. 886/2. 2642. 9199 Fax 44/0870. 8501251 Fax 886/2. 2642. 9099 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. [. . . ] The Track tab is divided in two sub tabs: Active and Saved. Track Tab Saved Sub Tab Active Sub Tab The Saved sub tab shows and manages a list of all saved track logs, allows for TracBack activation, and Map Page of saved logs. The active log stores up to approximately 10, 000 track log points, based on the criteria specified in the Track settings. You can save up to 15 track logs in memory, with up to 750 track log points in each saved log. A TracBack can be started from any of the saved tracks on this tab. The Active sub tab is for the active log (the log currently being recorded). Refer to page 58. Active Track Tab GPSMAP 392/398/492/498 Owner's Manual 57 MAIN MENU > TRACK TAB For the Active tab, the following settings are available: · Record Mode--contains three track recording options: · Off--no track log is recorded. · Fill--a track log is recorded until the track memory is full. · Wrap--a track log is continuously recorded, wrapping through the available memory (replacing the oldest track data with new data). · Interval--defines the frequency at which the track plots are recorded. Three interval settings are available: · Distance--records track based on a user-defined distance between points. · Time--records track plot based on a user-defined time interval. · Resolution--records track plot based on a user-defined variance from your course over ground. The resolution option is the default setting and is recommended for the most efficient use of memory and TracBack performance. The distance value (entered in the value field) is the maximum error allowed from the true course before recording a track point. 58 · Value--defines the distance or time used to record the track log. For the Saved tab, the following menu options are available: · Delete Track--deletes highlighted saved track log from memory. · Delete All--deletes all saved track logs from memory. GPSMAP 392/398/492/498 Owner's Manual MAIN MENU > DSC AND CARD TAB DSC Tab DSC uses marine VHF radio and GPS technologies to transmit and receive location information. DSC is used by mariners for two major operation: distress calls and position reporting. See page 21 and the "Appendix" for more information on DSC and using it with your GPSMAP 392/398/492/498. Card Tab The Card tab contains options for saving waypoints, routes and tracks to a data card. When data is saved to a data card, it can be exchanged with other compatible units and Garmin's MapSource software program on your PC. 1. From the Card tab, select the check box next to each type of item you want to transfer. Highlight Save To Card, and press ENTER to save the selected items to the data card. If transferring data from the card to the unit, highlight Merge From Card, and press ENTER to combine the selected items with existing GPS data. Highlight Replace From Card, and press ENTER to overwrite all selected items on your GPS. [. . . ] Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL U. K. 44/0870. 8501241 Fax 44/0870. 8501251 Online Auction Purchases: Products sold through online auctions are not eligible for rebates or other special offers from Garmin. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. [. . . ]