User manual GARMIN GPSMAP 3006C-3010C

[. . . ] Owner's Manual GPSMAP 3006C/3010C ® © 2004­2007 Garmin Ltd. (913) 397. 8200 or (800) 800. 1020 Fax (913) 397. 8282 Garmin (Europe) Ltd. Liberty House Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UK Tel. +44 (0) 870. 8501241 (outside the UK) 0808 2380000 (within the UK) Fax +44 (0) 870. 8501251 Garmin Corporation No. [. . . ] The following settings and options are available: · System Mode--select Normal (normal navigation) or Simulator (for practice only). For more information about Simulator Mode, see "Simulator Mode" on page 8. Select Off, Auto (automatically controls filtering), or On (allows you to enter a value from 1 to 255 seconds). GPSMAP 3006C/3010C Owner's Manual · System Info--shows the unit's software, basemap version, and electronic serial number. · Update Notes--shows software notes for the current software version. · Factory Dflts--restores all settings to Garmin's original setup values for all devices on the network. 1. ToadjustthebacklightlevelsFor DayandFor Night, highlightthe correspondingslider, andpressENTER. To adjust the automatic backlight settings: 61 MaIn Menu · Automatic Backlight--automatically adjusts the display brightness to a specified level at sunrise and sunset. Select Off, Alarms Only (sounds for alarms/messages), or Key and Alarm (sounds for key presses and alarms/messages). · language--sets the language for the unit's on-screen text. · Services--after a new device is detected on the network, clearing the Auto-Detect Services check box speeds up the startup sequence. If the Auto-Detect Services check box is not selected and new hardware is added, you must select the corresponding service check box to enable the new hardware device. The following soft keys are available: MaIn Menu > sYsteM tab Slders 5. PressupordownontheROCKERtoincreaseordecreasethebacklight level, andpressENTER. EntertheoffsetminutesforBefore SunriseorAfter Sunset. Ifzero, the unitautomaticallychangestothespecifiedlevelatsunrise/sunset. Press QUITtoexit. MaIn Menu 62 Units Sub Tab The following settings are available: · Position Format--used to change the coordinate system in which a given location reading appears. Only change the position format if you are using a map or chart that specifies a different position format or you want to use a format you are familiar with. The default format is latitude and longitude in degrees, minutes, and thousandths of a minute (hddd°mm. mmm'). · Depth--select the units of measure for depth in Feet (ft), Fathoms (fa), or Meters (m). You must be receiving NMEA Sonar depth data or using a Garmin Sonar Module for the depth to appear. Use the Units sub tab to define settings for Position Format, Depth, Map Datum, Temperature, Distance, Speed, and Elevation, Pressure, and Heading. WARNING: The Units sub tab settings affect how navigation information appears on the GPSMAP 3006C/3010C. If you are using a map or chart with your GPS, make sure the settings on the Units sub tab match that of the map or chart. If not, contact the map or chart maker to determine what position format, datum, heading, and units of measure are used for the map or chart. GPSMAP 3006C/3010C Owner's Manual MaIn Menu > sYsteM tab · Map Datum--manually select the datum reference used to determine a given location. The unit automatically selects the best datum depending on your chosen position format. Datums are used to describe geographic locations for surveying, mapping, and navigation and are not actual maps built in the unit. Although more than 100 datums are available, you should change the datum only if you are using a map or chart that specifies a different datum. WARNING: Selecting the wrong map datum can result in substantial position errors. [. . . ] The DAFIFTM product is provided "as is, " and no warranty, express or implied, including, but not limited to the implied warranties of merchantability and fitness for particular purpose or arising by statute or otherwise in law or from a course of dealing or usage in trade, is made by NGA as to the accuracy and functioning of the product. Neither NGA nor its personnel will be liable for any claims, losses, or damages arising from or connected with the use of this product. The user agrees to hold harmless the United States National Geospatial-Intelligence Agency. The user's sole and exclusive remedy is to stop using the DAFIF product. THE WEATHER DATA SOFTWARE PRODUCT IS PROVIDED "AS IS. " ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OF NONINFRINGEMENT ARE HEREBY EXCLUDED. [. . . ]