User manual GARMIN GPSMAP 292

[. . . ] GPSMAP 292/298 ® chartplotting receiver owner's manual © Copyright 2006 Garmin Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U. K. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. [. . . ] From either the Route Review or Active Route Pages, use the ROCKER to highlight the point to remove, and press ADJ/MENU. Highlight Remove, and press ENTER. To remove a point from a route: Trip Planning Data Fields Plan--the Route Review and Active Route Pages also show tripplanning information for each leg or the entire route. Available information includes Course, ETA, Fuel (to point), Leg Distance, Leg Fuel, Leg Time, Sunrise and Sunset (at point location), and Time To (point). 56 NOTE: Fuel flow rates on your unit are measured in units per hour. System setting changes for units of measure (statute, nautical or metric) do not affect the fuel flow measure. You should enter fuel flow rates based on available information for your vehicle's (operator's manual, or performance specifications. ) Make note of the units of measure (gallons or liters. ) GPSMAP 292/298 Owner's Manual MAIN MENU > TRACK TAB The Track tab specifies whether or not to record a track log, define how it is recorded, or save track log data for future use. The Track Logs Page also provides an indicator of the memory used for the active track log and options to clear the track memory. The Track tab is divided in two sub tabs: Active and Saved. Track Tab Saved Sub Tab Active Sub Tab The Saved sub tab shows and manages a list of any saved track logs, allows for TracBack activation, and Map Page of saved logs. The active log stores up to approximately 10, 000 track log points, based on the criteria specified in the Track settings. Up to 15 track logs can be saved in memory, with up to 750 track log points in each saved log. A TracBack can be started from any of the saved tracks on this tab. The Active sub tab is for the active log (the log currently being recorded). It shows track memory used and current settings refer to page 58. Active Track Tab GPSMAP 292/298 Owner's Manual 57 MAIN MENU > TRACK TAB For the Active tab, the following settings are available: · Record Mode--contains three track recording options: · Off--the track log is not recorded. Selecting the Off setting prevents you from using the TracBack feature. · Fill--a track log is recorded until the track memory is full. · Wrap--records the track log is continuously recorded, wrapping through the available memory (replacing the oldest track data with new data). · Interval--defines the frequency the track plots are recorded. Three interval settings are available: · Distance--records track based on a user-defined distance between points. · Time--records track plot based on a user-defined time interval. · Resolution--records track plot based on a user-defined variance from your course over ground. The resolution option is the default setting and is recommended for the most efficient use of memory and TracBack performance. The distance value (entered in the value field) is the maximum error allowed from the true course before recording a track point. 58 · Value--defines the distance or time used to record the track log. For the Saved tab, the following menu options are available: · Delete Track--deletes highlighted saved track log from memory. · Delete All--deletes all saved track logs from memory. GPSMAP 292/298 Owner's Manual MAIN MENU > DSC AND CARD TAB DSC Tab Digital Selective Calling (DSC) uses marine VHF radio and Global Positioning System (GPS) technologies to transmit and receive location information. [. . . ] The unit should be securely packed with the tracking number clearly written on 108 the outside of the package. The unit should then be sent, freight charges prepaid, to any Garmin warranty service station. A copy of the original sales receipt is required as the proof of purchase for warranty repairs. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL U. K. [. . . ]