User manual GARMIN GPSMAP 210

[. . . ] Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www. garmin. com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin®, GPSMAP®, AutoLocate® , UltraScroll®, TracBack®, BlueChart®, MapSource®, and BlueChart® g2TM are registered trademarks of Garmin Ltd. [. . . ] (You can also choose from other points, such as Cities or Tide Stations from this list. ) From either the User or Nearest From Current Location tab lists, choose the waypoint you want, and press ENTER twice. (See page 48 for searching for waypoints by name. ) GPSMAP 392/398/492/498 Owner's Manual 55 MAIN MENU > ROUTES TAB To plan your route: Drag the route leg to an existing waypoint (shown), map item, or a blank spot on the map to create a new route point. 1. From the Route Review Page, press ADJ/MENU, highlight Plan, and press ENTER. Use the ROCKER to enter planning data in the Speed, Depart Time, Fuel Flow, and Depart Date fields. Remove--removes a point (waypoint or map item) from a route. This option is available from both the Route Review and Active Route Pages. 1. From either the Route Review or Active Route Pages, use the ROCKER to highlight the point to remove, and press ADJ/MENU. Highlight Remove, and press ENTER. To remove a point from a route: Trip Planning Data Fields Plan--the Route Review and Active Route Pages also show tripplanning information for each leg or the entire route. Available information includes Course, ETA, Fuel (to point), Leg Distance, Leg Fuel, Leg Time, Sunrise and Sunset (at point location), and Time To (point). 56 NOTE: Fuel flow rates on your unit are measured in units per hour. System setting changes for units of measure (statute, nautical, or metric) do not affect the fuel flow measure. You should enter fuel flow rates based on available information for your vehicle's (operator's manual performance specifications) and note of the units of measure (gallons, liters. ) GPSMAP 392/398/492/498 Owner's Manual MAIN MENU > TRACK TAB Use the Track tab to specify whether or not to record a track log, define how it is recorded, or save track log data for future use. The Track Logs Page also provides an indicator of the memory used for the active track log and allows you to clear the track memory. Press QUIT. To transfer data on your PC to or from a data card: GPSMAP 392/398/492/498 Owner's Manual 59 MAIN MENU > MSGS TAB Msgs Tab The Message tab on the Main Menu shows a list of messages generated by your GPSMAP 392/398/492/498. Use the ROCKER to scroll through the entire list of messages on the Log tab. 1. Highlight Message from the vertical list of tabs. To view the messages: 1. Select OK, and press ENTER again to confirm. To delete all messages: 3. Press ENTER to view detailed information about that message. 60 GPSMAP 392/398/492/498 Owner's Manual MAIN MENU > PAGES AND MAP TABS Pages Tab The Pages tab allows you to turn main pages on or off and customize the order. 1. Highlight a page name, and press ENTER. To turn a main page on or off: The Map tab changes the display properties of the Map Page. The following pages contain descriptions of the Map tab's six sub tabs. Map Tab Prefs Sub Tab To customize the main pages order: The Reset Pages button returns the unit to the default page sequence. · Map Outlines--On/Off: turns the coverage boxes for BlueChart/MapSource data on or off. · Symbol Set--NOAA, International: controls the navaid symbol set. · Light Sectors--Off, Auto, On: controls the drawing light sectors on the map. · Spot Soundings--On, Warn Depth, Off: turns on the depth spot sounding data. · Warn Depth--shows the spot sounding below the set value in red. [. . . ] To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number. The unit should be securely packed with the tracking number clearly written on 108 the outside of the package. The unit should then be sent, freight charges prepaid, to any Garmin warranty service station. A copy of the original sales receipt is required as the proof of purchase for warranty repairs. [. . . ]