User manual GARMIN GPS V

[. . . ] StreetPilot Atlantic TM 12 parallel channel receiver owner's manual and reference guide © 1999 GARMIN Corporation GARMIN International 1200 E 151st Street, Olathe, Kansas 66062 U. S. A. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ U. K. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without prior written consent of GARMIN Corporation. GARMIN Corporation hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or printed copy of this manual contains the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual is strictly prohibited. [. . . ] In most cases, a list of available options is shown (bottom left picture). Use the ROCKER keypad to select the desired choice, then press the ENTER key again to accept the change. Use the UP key to return to the file tab area and select another file tab, if desired. "Pop Up" Options Windows At some time, you may desire to change part of the System Setup back to the way it was the first time you used your StreetPilot. This can be done by selecting the option called Restore Factory Settings. 32 Reference To restore the factory settings: 1. Use the ROCKER keypad to move the cursor to the file tab for which you want to restore the factory settings. A window is displayed with Restore Factory Settings highlighted (top right picture). If desired, repeat steps 1 through 3 for other file tabs. System Setup The file tab headings and System Setup functions are: Restoring Factory Settings General - Simulator, Night Mode, Battery Type, Beeper, and Distance Units. Time - Formats for 12- or 24-hour Time, Time Zone, Display of Current Time and Date, Sunrise and Sunset Times. The following pages describe, in more detail, the available setting for each System Setup file tab item. 33 Reference `General' File Tab `General' File Tab (see top left picture) Simulator - Allows you to operate the StreetPilot indoors to plan trips and find locations when the unit is unable to receive GPS satellite signals. The Simulator Mode is especially useful if you are indoors and wish to try the StreetPilot features. Night Mode - Night Mode alters the display colors for more comfortable viewing in dim ambient conditions. Auto mode activates the Night Mode feature between sunset and sunrise using the GPS clock for the current day of the year. Backlight Timeout - Allows continuous screen/keypad backlighting when (Always On) is selected or activates automatic shutoff to limit battery drain. Automatic shutoff times (from last key press) range from 15 seconds to 4 minutes. Battery Type - Used to designate the type of batteries currently being used to power the StreetPilot: Alkaline or NiCad (Nickel Cadmium). This setting enables more accurate readings from the battery gauge on the Dashboard Page (see page 27). Beeper - Allows you to determine when the internal beeper sounds: Key and Message, Message Only, or None. The beep confirms that a button has been pressed or indicates a message. Night Mode `General' File Tab 34 Distance Units - Allows you to select the desired units of measure for distance in Miles or Kilometers. If you select Kilometers, the speed will be shown in Kilometers per Hour and the elevation will be shown in meters. Reference `Alarms' File Tab (top right picture) `Alarms' File Tab Approaching Waypoint Alarm - Provides an alarm message once you are within a set time (choices range from 15 seconds to five minutes) from your turn or destination waypoint. As you approach the waypoint, a message occurs when your estimated arrival time is within the alarm time entered. Speed Alarm - Provides an alarm message as a reminder when your speed exceeds a preset limit. To enable/disable the speed alarm: 1. If enabling the alarm, highlight the speed field and press the ENTER key. [. . . ] Speed - The current velocity at which you are traveling, relative to a ground location. Stopped Time - The length of time which the vehicle has been stopped (stationary) during the time the unit has been tracking your location, since the Trip Computer was last reset. Time to Go - The estimated time it will require for you to reach your destination, based on your current speed and the distance to the destination. Total Time - The total length of time for which the StreetPilot has been tracking your location, since the Trip Computer was last reset. [. . . ]