User manual GARMIN G1000-QUEST KODIAK COCKPIT REFERENCE GUIDE

[. . . ] Integrated Flight Deck Cockpit Reference Guide Quest Kodiak 100 Copyright © 2007 Garmin Ltd. This manual reflects the operation of System Software version 0552. 00 or later for the Quest Kodiak 100. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. [. . . ] Turn the small FMS Knob to select the fourth rectangular page icon. 2) 3) Press the ENT Key. The selected VOR frequency is placed in the NAV standby frequency field. Press the FMS Knob to remove the flashing cursor. 7. 12 NEAREST USER WAYPOINT Figure 7-14 Nearest User Waypoints Page Figure 7-13 Nearest VOR Page Select the Nearest User Waypoint Page 1) 2) Turn the large FMS Knob to select the `NRST' page group. With the Nearest User Waypoint Page displayed, press the FMS Knob to activate the cursor. If any previously entered User Waypoints are within 200 nm, these will be displayed with the closest listed first. The remaining information on the Nearest User Waypoint Page pertains to the selected Nearest User Waypoint. 190-00645-00 Rev. A View Information on the Nearest VOR 1) With the Nearest VOR Page displayed, press the VOR Softkey to place the cursor in the `NEAREST VOR' Window. With the Nearest VOR Page displayed, press the FREQ Softkey to highlight the VOR frequency in the `FREQUENCY' field. Select a Nearest User Waypoint 1) 2) 3) Select and Load a VOR Frequency 1) 2) 7-8 Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100 SECTION 7 ­ NAVIGATION 3) Press the FMS Knob to remove the flashing cursor. 7. 14 NEAREST AIRSPACES 7. 13 NEAREST FREQUENCIES Figure 7-16 Nearest Airspaces Page Select the Nearest Airspaces Page Figure 7-15 Nearest Frequencies Page 1) 2) Select the Nearest Frequencies Page 1) 2) Turn the large FMS Knob to select the `NRST' page group. Turn the small FMS Knob to select the sixth rectangular page icon. Turn the large FMS Knob to select the `NRST' page group. Turn the small FMS Knob to select the seventh rectangular page icon. Airspace Alerts Box · If the projected course takes the aircraft inside an airspace within the next ten minutes, `Ahead' is displayed. · If the aircraft is within two nautical miles of an airspace and the current course takes the aircraft inside, `Ahead < 2 nm' is displayed. · If the aircraft is within two nautical miles of an airspace and the current course will not take the aircraft inside, `Within 2 nm' is displayed. · If the aircraft has entered an airspace, `Inside' is displayed. Select and Load the Nearest ARTCC, FSS, or Weather Frequency 1) With the Nearest Frequencies Page displayed, press the ARTCC, FSS, or Wx Softkey to place the cursor in the appropriate field. Press the ENT Key to load the frequency into the COM frequency standby field. Press the FMS Knob to remove the flashing cursor. 2) 3) 4) 190-00645-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100 7-9 SECTION 7 ­ NAVIGATION View Additional Details for a Listed Airspace 1) 2) 3) 4) 5) With the Nearest Airspace Page displayed, press the FMS Knob to activate the cursor. Turn the large FMS Knob to scroll through the list, highlighting the desired airspace. Press the ALERTS Softkey to place the cursor in the `AIRSPACE ALERTS' field. Press the FMS Knob to remove the flashing cursor. View and Quickly Load the Frequency for a Controlling Agency 1) With the Nearest Airspace Page displayed, press the FREQ Softkey to place the cursor in `FREQUENCIES' field. Press the ENT Key to load the frequency into the COM frequency standby field. Press the FMS Knob to remove the flashing cursor. 2) 3) 4) 7-10 Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100 190-00645-00 Rev. A SECTION 8 ­ FLIGHT PLANNING SECTION 8: FLIGHT PLANNING The following discussions pertain to the Multi Function Display, unless otherwise indicated. 4) 5) 6) 7) Repeat steps 2 and 3 until the desired name is entered. [. . . ] This occurs when an aviation database update eliminates an obsolete waypoint. The flight plan cannot find the specified waypoint and flags this message. This can also occur with user waypoints in a flight plan that is deleted. Remove the waypoint from the flight plan if it no longer exists in any database, OR update the waypoint name/identifier to reflect the new information. [. . . ]