User manual GARMIN G1000-KING AIR C90 COCKPIT REFERENCE GUIDE

[. . . ] G1000 ® Integrated Flight Deck Cockpit Reference Guide for the Hawker Beechcraft C90A/GT FLIGHT INSTRUMENTS NAV/COM/TRANSPONDER/AUDIO PANEL AUTOMATIC FLIGHT CONTROL SYSTEM GPS NAVIGATION FLIGHT PLANNING PROCEDURES HAZARD AVOIDANCE ADDITIONAL FEATURES ANNUNCIATIONS & ALERTS APPENDIX INDEX Copyright © 2007 Garmin Ltd. All rights reserved. This manual reflects the operation of System Software version 0636. 00 or later for the Hawker Beechcraft C90A/GT. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin AT, Inc. , 2345 Turner Road SE, Salem, OR 97302, U. S. A. [. . . ] To cancel the delete request, turn the large FMS Knob to highlight `CANCEL' and press the ENT Key. Once all changes have been made, press the FMS Knob to remove the cursor. Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT 190-00664-00 Rev. A 5) 22 Flight Planning INVERT AND ACTIVATE A STORED FLIGHT PLAN 1) 2) 3) 4) 5) 6) Press the FPL Key. The original flight plan remains intact in its flight plan catalog storage location. COPY A FLIGHT PLAN 1) 2) 3) 4) 5) 6) Press the FPL Key. With `OK' highlighted, press the ENT Key to copy the flight plan. To cancel, turn the large FMS Knob to highlight `CANCEL' and press the ENT Key. DELETE A FLIGHT PLAN 1) 2) 3) 4) 5) 6) Press the FPL Key. With `OK' highlighted, press the ENT Key to delete the flight plan. To cancel, turn the large FMS Knob to highlight `CANCEL' and press the ENT Key. 190-00664-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT 23 Flight Planning GRAPHICAL FLIGHT PLAN CREATION 1) 2) Press the FPL Key to display the Active Flight Plan Page. Use the Joystick to move the pointer to the desired point on the map to be inserted as a waypoint in the flight plan. If the selected waypoint is to be placed anywhere other than the end of the flight plan, press the FMS Knob to activate the cursor. The default user waypoint naming is USR000, USR001, USR002, and so on. To change the user waypoint name, follow the procedure for modifying a user waypoint. 3) 4) 5) 24 Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT 190-00664-00 Rev. A Procedures PROCEDURES LOAD AND ACTIVATE A DEPARTURE PROCEDURE 1) 2) 3) 4) 5) 6) 7) 8) 9) Press the PROC Key. The cursor is displayed in the `DEPARTURE' field with a list of available departures. The cursor is displayed in the `TRANSITION' field with a list of available transitions. The departure will be active when the flight plan is active. ACTIVATE A DEPARTURE LEG 1) 2) 3) 4) 5) Press the FPL Key to display the active flight plan. Turn the large FMS Knob to highlight the desired waypoint within the departure. With `ACTIVATE' highlighted, press the ENT Key. LOAD AN ARRIVAL PROCEDURE 1) 2) 3) Press the PROC Key. The cursor is displayed in the `ARRIVAL' field with a list of available arrivals. 25 190-00664-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT Procedures 4) 5) 6) 7) 8) 9) Turn the large FMS Knob to highlight the desired arrival. Press the ENT Key. 10) With `LOAD?' highlighted, press the ENT Key. [. . . ] The system will automatically transition to the next vertical waypoint. The lateral flight plan contains a procedure turn, vector, or other unsupported leg type prior to the active vertical waypoint. The current crosstrack exceeds the limit, causing vertical deviation to go invalid. The current track angle error exceeds the limit, causing the vertical deviation to go invalid. [. . . ]