User manual GARMIN G1000-CESSNA NAV III COCKPIT REFERENCE GUIDE

[. . . ] G1000 TM Cockpit Reference Guide for the Cessna Nav III Copyright © 2004, 2005 Garmin Ltd. This manual reflects the operation of System Software versions 0394. 06 or later for Cessna 172R aircraft, 0395. 07 or later for Cessna 172S aircraft, 0371. 15 or later for normally aspirated Cessna 182 aircraft, 0372. 14 or later for turbocharged Cessna 182 aircraft, 0373. 10 or later for normally aspirated Cessna 206 aircraft, and 0374. 10 or later for turbocharged Cessna 206 aircraft. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. NOTE: Cessna Nav III aircraft include the Cessna 172R, the Cessna 172S, the normally aspirated Cessna 182 (182), the turbocharged Cessna 182 (T182), the normally aspirated Cessna 206 (206), and the turbocharged Cessna 206 (T206). Unless otherwise indicated, information in the G1000 Cockpit Reference Guide pertains to all Cessna Nav III aircraft. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. [. . . ] Turn the large FMS knob to move the cursor to the desired field and turn the small FMS knob to make changes. Select the User Waypoint Information Page and press MENU to display the User Waypoint Information Page Options or press the DELETE softkey. Turn the large FMS knob to select `Delete User Waypoint' and press the ENT key. The message `Would you like to delete the user waypoint' is displayed. With `YES' highlighted, press the ENT key. Figure 8-3 Active Flight Plan Window on the PFD 2. 3. 4. 8. 3 1. ACTIVATE A STORED FLIGHT PLAN Press the FPL key and turn the small FMS knob to display the Flight Plan Catalog Page. Delete a User Waypoint 1. 2. 8. 2 1. VIEWING THE ACTIVE FLIGHT PLAN Press the FPL key. 4. Figure 8-4 Flight Plan Catalog Page Press the FMS knob to activate the cursor. Turn the large FMS knob to highlight the desired flight plan and press the ACTIVE softkey. To cancel the flight plan activation, turn the large FMS knob to highlight `CANCEL' and press the ENT key. 8. 4 1. ACTIVATE A FLIGHT PLAN LEG From the Active Flight Plan Page, press the FMS knob to activate the cursor and turn the large FMS knob to highlight the desired destination waypoint. Figure 8-2 Active Flight Plan Page on the MFD 8-2 Garmin G1000 Cockpit Reference Guide for the Cessna Nav III SECTION 8 ­ FLIGHT PLANNING 2. OR Press the MENU key, select the `Activate Leg' option from the page menu and press the ENT key. 2. INVERT ACTIVE FLIGHT PLAN From the Active Flight Plan Page, press the MENU key to display the Page Menu. Turn the large FMS knob to highlight `Invert Flight Plan' and press the ENT key. The original flight plan remains intact in its flight plan catalog storage location. With `OK' highlighted, press the ENT key to invert the flight plan. 4. 3. Figure 8-5 Activate Flight Plan Leg Confirmation 8. 5 1. 2. STOP NAVIGATING A FLIGHT PLAN Press the FPL key to display the Active Flight Plan Page. Press the MENU key to display the Page Menu window. Figure 8-8 Invert Flight Plan Figure 8-9 Invert Flight Plan Confirmation 8. 7 Figure 8-6 Delete Flight Plan CREATE A NEW FLIGHT PLAN Press the FPL key and turn the small FMS knob to display the Flight Plan Catalog Page. Press the NEW softkey to display a blank flight plan page for the first empty storage location. 3. Turn the large FMS knob to highlight `Delete Flight Plan' and press the ENT key. With `OK' highlighted, press the ENT key to deactivate the flight plan. This will not delete the stored flight plan, only the active flight plan. To create a new flight plan using the MFD: 1. 2. Figure 8-7 Delete Flight Plan Confirmation Garmin G1000 Cockpit Reference Guide for the Cessna Nav III 8-3 SECTION 8 ­ FLIGHT PLANNING 1. 2. Figure 8-10 Create FPL on MFD Press the FPL key and press the small FMS knob to activate the cursor. Turn the small FMS knob to enter the first character of the flight plan starting identifier. [. . . ] The system notifies the pilot to load the approach frequency for the appropriate NAV SLCT FREQ ­ Select appropriate frequency for approach. SLCT NAV ­ Select NAV on CDI for The system notifies the pilot to set the CDI to the correct NAV receiver. NO WGS84 WPT ­ Non WGS 84 The selected waypoint [xxxx] does not use the WGS 84 datum. Cross-check position waypoint for navigation -[xxxx] with alternate navigation sources. [. . . ]