User manual GARMIN G1000-BEECHCRAFT BARON 58-G58 COCKPIT REFERENCE GUIDE

[. . . ] G1000 TM Cockpit Reference Guide for the Beechcraft 58/G58 Copyright © 2005 Garmin Ltd. This manual reflects the operation of System Software version 0500. 00 or later for the Beechcraft 58/G58. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. [. . . ] Turn the FMS knobs to select the desired course and press the ENT key. Press the ENT key again to begin navigation using the selected destination and course. Turn the large FMS knob to place the cursor in the desired selection field. Turn the small FMS knob to begin selecting the desired identifier, location, etc. If a flight plan is still active, the G1000 resumes navigating the flight plan along the closest leg. 3. Figure 7-3 Canceling Direct-to Navigation 7-2 Garmin G1000 Cockpit Reference Guide for the Beechcraft 58/G58 SECTION 7 ­ NAVIGATION 7. 3 AIRPORT INFORMATION 7. To remove the flashing cursor, press the FMS knob. Turn the small FMS knob to display the next runway for the selected airport. To remove the flashing cursor, press the FMS knob. Access Runway Information 1. 5. Access Frequency Information Figure 7-5 Airport Information Page 1. Turn either FMS knob to scroll through the list, placing the cursor on the desired frequency. Press the ENT key to place the selected frequency in the standby field of the `COM' or `NAV' window. Select the Airport Information Page 1. Turn the small FMS knob to select the first rectangular page icon. Enter a Waypoint Facility Name or City Location: 1. Turn the large FMS knob to select the facility name or location (city) field. Repeat steps 3 and 4 until the facility name or location is selected, then press the ENT key. If there are duplicate names in the database, a list is displayed from which to chose the desired location. To remove the flashing cursor, press the FMS knob. · `TX' ­ transmit only, RX - receive only · `PT' ­ part time frequency · `i' ­ additional information exists, press the ENT key If a listed frequency has sector or altitude restrictions, the frequency is preceded by an info designation. 5. Garmin G1000 Cockpit Reference Guide for the Beechcraft 58/G58 7-3 SECTION 7 ­ NAVIGATION 7. 4 INTERSECTION INFORMATION 7. 5 NDB INFORMATION Select the Intersection Information Page 1. Turn the small FMS knob to select the second rectangular page icon. Figure 7-7 NDB Information Page Select the NDB Information Page 1. 2. Figure 7-6 Intersection Information Page Turn the large FMS knob to select the WPT page group. Turn the small FMS knob to select the third rectangular page icon Access Information on an Intersection 1. With the Intersection Information Page displayed, press the FMS knob to activate the cursor. Turn the FMS knobs to enter a name for the identifier and press the ENT key. Press the FMS knob to remove the flashing cursor. View Information on a Specific NDB: 1. With the NDB Information Page displayed, press the FMS knob to activate the cursor. [. . . ] FPL WPT MOVE ­ Flight plan The system has detected that a waypoint coordinate has changed due to a new waypoint moved. This occurs when a stored flight plan contains procedures that have been manually Verify user modified procedures. Verify that the user-modified procedures in stored flight plans are correct and up to date. FPL TRUNC ­ Flight plan has been This occurs when a newly installed aviation database eliminates an obsolete approach or arrival used by a stored flight plan. [. . . ]