User manual GARMIN FORERUNNER 301

[. . . ] Forerunner 301 ® personal trainer owner's manual © Copyright 2004­2006 Garmin Ltd. Unit 5, The Quadrangle Abbey Park Industrial Estate Romsey, SO51 9DL, U. K. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. [. . . ] If you want to remember landmarks or return to a certain spot, mark a Location there. Highlight the Name field and use the and arrows and enter to change the name, if you wish. Highlight the Symbol field and use the and arrows and enter to select a new symbol. Use the and arrows to highlight the appropriate tab according to the first letter or number of the Location name. Highlight the Location you are searching for and press enter. To find and go to a Location: To mark your Location: Forerunner® 301 Owner's Manual 31 NAVIGATING > MARKING AND FINDING LOCATIONS 6. Find the Location you want to change (see "To find and go to a Location"). Select the name, symbol, elevation, or latitude and longitude and make any necessary changes. Find the Location you want to delete (see "To find and go to a Location"). Then highlight Yes and press enter. To delete a Location: NOTE: You can also navigate to a starting point by following your path (not a straight line). Highlight Find Location and press enter. 32 To stop navigating to a Location: To edit a Location: Forerunner® 301 Owner's Manual NAVIGATING > NAVIGATING BACK TO START Navigating Back to Start During each workout, the Forerunner 301 creates a tiny dotted line on the Map called a "track. " Tracks are like tiny footprints that show you exactly where you have traveled. When you want to return to your starting point, the Forerunner takes you back along the exact path you traveled. Back to Start works only if you have an active workout (timer running) or if you have not pressed reset since your last workout. A line following your path appears on the Map from your current position to your starting position. To navigate back to your starting point: Forerunner® 301 Owner's Manual 33 NAVIGATING > NAVIGATING WITH ROUTES Navigating with Routes A route provides straight line directions between two or more points on the Map. After you create Locations, you can use them to build routes involving a few points or many points. Then you can save the routes and use them to navigate at any time. 1. Then find the Location you want to add using the instructions for finding Locations (see "To find and go to a Location"). Highlight the correct Location and press enter. To create a route: 5. When you are finished adding Locations, highlight Follow and press enter. To follow the route as listed, select the last point in the route from the menu. To invert the route, select the first point in the route from the menu. Your route appears on the Map as a dark line connecting each Location. 1. A menu appears. Forerunner® 301 Owner's Manual To find and navigate a route: 34 NAVIGATING > NAVIGATING WITH ROUTES 4. [. . . ] Units purchased in the United States or Canada must be returned to the Garmin service center in the United Kingdom, the United States, Canada, or Taiwan for service. Any attempt to open the case to change or modify the unit in any way will void your warranty and may result in permanent damage to the equipment. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]