User manual GARMIN FISHFINDER 340C

[. . . ] Fishfinder 340C full-featured color sonar owner's manual © 2006 Garmin Ltd. Garmin Corporation 1200 East 151st Street, Unit 5, The Quadrangle, Abbey Park Industrial Estate, No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Olathe, Kansas 66062, U. S. A. 886/2. 2642. 9199 Fax 913/397. 8282 Fax 44/0870. 8501251 Fax 886/2. 2642. 9099 All rights reserved. [. . . ] If the Fishfinder is connected to a power supply that exceeds 35 volts DC, a "Battery voltage is too high" warning appears and the Fishfinder turns off. If the Fishfinder does not detect a transducer, it automatically enters Simulator mode (see page 22). When the Fishfinder detects a transducer at initial start up, a Select Transducer Type window appears. Press QUIT to return to the Sonar Page. Learning the Basic Functions To turn the Fishfinder on or off: Press and hold Power/Backlight to turn the Fishfinder on or off. To start your Fishfinder for the first time: 1. Press up or down on the Rocker to change the user-set backlight setting. Press and release Power/Backlight to toggle the backlight setting between maximum, user-set, and minimum brightness levels. Press ENTER to return to the previous page. To change the software language on the screen: To change the backlight setting: Fishfinder 340C Owner's Manual 21 USING THE FISHFINDER 340C > USING SIMULATOR MODE Using Simulator Mode You can use Simulator mode to practice and learn the operation of the Fishfinder. If the Fishfinder does not detect a transducer at startup, it automatically starts in Simulator mode. While in Simulator mode, the Fishfinder displays a bottom scene, and you can control the Fishfinder (except the Gain and Auto Gain options). If no keys are pressed for two minutes, the Fishfinder automatically resets to default settings while in Simulator mode. To exit Simulator mode, turn off the Fishfinder. 22 Fishfinder 340C Owner's Manual USING THE FISHFINDER 340C > USING THE FISHFINDER 340C KEYPAD Using the Fishfinder 340C Keypad Power/Backlight Key · Press and hold to turn the unit on or off. · Press and release to cycle through the maximum, user-set, and minimum backlight brightness levels. ENTER Key · Press to enter highlighted items and confirm on-screen messages. · Press to mark a waypoint at the pointer position when in Pointer mode (when connected to a compatible NMEA GPS. · Press and hold to open the Main Menu. Fishfinder 340C Owner's Manual RANGE Keys · Press to display the Range Menu and select a setting. Rocker Key · Press to move through menus, highlight fields, enter data, or move the pointer. GAIN Key · Press to display the Gain Menu, and then use the Rocker to select a setting. DATA/CNFG Key · Press to toggle the data fields in the upperleft corner of the page between the basic and advanced configurations. · Press and hold to enter advanced data setup. 23 USING THE FISHFINDER 340C > UNDERSTANDING THE MAIN PAGES Understanding the Main Pages The Fishfinder 340C typically offers several main pages for you to use, including the Sonar Page, Flasher Page, and Numbers Page. If you are using a dual frequency transducer, and you have the Frequency set to Dual, the following pages are available instead: Split Sonar (200 kHz and 50 kHz), Sonar (200 kHz), Sonar (50 kHz), and Numbers. The Pages Menu disappears after a few seconds. Using the Sonar Pages The Sonar Page that you see and the options that appear in its Adjustment Menu depend on the transducer and settings that you are using. If you are using a dual beam transducer, you can access the basic Sonar Page and its related Adjustment Menu. Current adjustment option Water depth at the transducer Depth scale Fish Depending on the current page, you can access page-specific information, including one or more of the following: · Access the Main Menu by pressing and holding the ADJ/MENU key (see page 27). [. . . ] SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking 46 number. The unit should be securely packed with the tracking number clearly written on the outside of the package. The unit should then be sent, freight charges prepaid, to any Garmin warranty service station. [. . . ]