User manual GAI-TRONICS ICP9000 NAVIGATOR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GAI-TRONICS ICP9000 NAVIGATOR. We hope that this GAI-TRONICS ICP9000 NAVIGATOR user guide will be useful to you.


GAI-TRONICS ICP9000 NAVIGATOR : Download the complete user guide (484 Ko)

You may also download the following manuals related to this product:

   GAI-TRONICS ICP9000 NAVIGATOR INSTALLATION AND SERVICE MANUAL (918 ko)

Manual abstract: user guide GAI-TRONICS ICP9000 NAVIGATOR

Detailed instructions for use are in the User's Guide.

[. . . ] 43004-025F . GAI-TRONICS® CORPORATION A HUBBELL COMPANY Model ICP9000 Navigator Series Console Operator's Manual GAI-Tronics Corporation 400 E. Mohnton, PA 19540 USA 610-777-1374 800-492-1212 Fax: 610-796-5954 VISIT WWW. GAI-TRONICS. COM FOR PRODUCT LITERATURE AND MANUALS CONFIDENTIALITY NOTICE This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. [. . . ] The paging tones can be heard through the select speaker as they are transmitted. When the paging tones are complete, "TALK NOW" flashes at the upper right of the information window if talk time has been programmed for the particular type of paging or alias. While "TALK NOW" is flashing, the microphone is active and voice audio is transmitted over the channel(s) to the paged units. To extend the talk time, press and hold the main TRANSMIT, page TRANSMIT or channel TRANSMIT button. Additionally, it is possible to initiate an alert tone during the talk time. To activate an alert while "TALK NOW" is flashing, simply press the desired alert tone button. Upon releasing the alert tone button, the console will again flash "TALK NOW" at the upper right of the information window for a minimum of two seconds. During this time, the microphone is active and voice audio is transmitted over the channel(s). To extend the talk time, press and hold the main TRANSMIT, page TRANSMIT or channel TRANSMIT button. When the talk time is over, the operator releases the appropriate transmit button or if no talk time has been programmed, the console exits paging mode, returns to normal operation, or hot standby paging, and selects the previously selected channel. As discussed earlier, the operator should exercise caution when following a page with a voice transmission to ensure that the correct channel is selected. Sequential Channel Specific Group Paging A special type of alias preprogrammed with a sequence of other aliases is called a group page. A group page is configured using CARD Suite and contains of list of alias pages that are sequentially transmitted on the auto-base station channel, as programmed in each alias. This allows for activation of multiple sirens or paging of several emergency services at once. As a group page progresses, each alias in the group is referenced, and the channel and frequency on which it has been preprogrammed to page are selected. The alias is displayed on the paging line and the paging tones are heard through the select speaker as the page is transmitted. Upon completion of all pages, "TALK NOW" flashes at the upper right of the display if a talk time has been programmed for the group. During this time, the microphone is active and voice audio is transmitted over the channel(s). To extend the talk time, press and hold the main TRANSMIT, page TRANSMIT or channel TRANSMIT button on any transmitting channel. When the talk time is over, the operator releases the appropriate transmit button or if no talk time has been programmed, the console exits paging mode, returns to normal operation, or hot standby paging, and selects the previously selected channel. As discussed earlier, the operator should exercise caution when following a page with a voice transmission to ensure that the correct channel is selected. 39 12/10 Standard Feature Operation ICP9000 Navigator Series Console Operator's Manual Stack Paging The Stack paging feature provides the operator the capability to create a sequential group page as needed. A stack page can consist of manual pages, alias pages and even group pages. To create a stack page, as with manual mode or alias mode paging, select the desired page and paging channel, if applicable. [. . . ] The setting of this feature is maintained until changed by the operator. 67 12/10 Console Diagnostics ICP9000 Navigator Series Console Operator's Manual Printer Error Messages The console supports the use of a serial printer to log decoded ANI information as well as access to diagnostic data. If the printer is enabled through the CARD Suite software and the console detects an error, PRINTER ERROR is displayed on the bottom line of the display window unless the printer error message is disabled. This is useful to detect when the printer has lost power or is out of paper. To disable or enable the printer error, enter the printer error screen. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GAI-TRONICS ICP9000 NAVIGATOR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GAI-TRONICS ICP9000 NAVIGATOR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.