User manual GAI-TRONICS 7325-102

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GAI-TRONICS 7325-102. We hope that this GAI-TRONICS 7325-102 user guide will be useful to you.


GAI-TRONICS 7325-102 : Download the complete user guide (258 Ko)

You may also download the following manuals related to this product:

   GAI-TRONICS 7325-102 DATASHEET (51 ko)

Manual abstract: user guide GAI-TRONICS 7325-102

Detailed instructions for use are in the User's Guide.

[. . . ] Mohnton, PA 19540 USA 610-777-1374 800-492-1212 Fax: 610-796-5954 VISIT WWW. GAI-TRONICS. COM FOR PRODUCT LITERATURE AND MANUALS Model 703-002, 7325-102, and 7335-002 Multi-Party 24 V DC Amplifier Enclosures Pub. 42004-141F Page: 2 of 12 When installing an add-on station, consult the 24 V dc system layout diagrams at the end of this manual. These figures, when used in conjunction with the station installation information and cable layout guide, should provide all the information necessary to install additional Page/Party stations. In 24-volt systems, plan on several branch lines from the dc source with no more than six stations per branch. [. . . ] Under no circumstances should cable entries be made in the side of the enclosure as this may interfere with the installation of the plug-in amplifier. For specific details including mounting hole dimensions, refer to Figure 1 for the Model 703-002 Indoor Enclosure, Figure 2 for Model 7335-002 Weatherproof Non-metallic Enclosure, and Figure 3 for the Model 7325-102 Weatherproof Metallic Enclosure. When mounting the enclosure, use caution to avoid damaging the terminal blocks inside. The suggested mounting height for all station enclosures is 54 inches (137 cm) up to the centerline of the enclosure. Figure 1. Model 703-002 Indoor Enclosure Mounting Details f:\standard ioms - current release\42004 instr. manuals\42004-141f. doc 11/10 Model 703-002, 7325-102, and 7335-002 Multi-Party 24 V DC Amplifier Enclosures Pub. Model 7335-002 Outdoor Enclosure Mounting Details f:\standard ioms - current release\42004 instr. manuals\42004-141f. doc 11/10 Model 703-002, 7325-102, and 7335-002 Multi-Party 24 V DC Amplifier Enclosures Pub. Model 7325-102 Weatherproof Aluminum Enclosure Mounting Details f:\standard ioms - current release\42004 instr. manuals\42004-141f. doc 11/10 Model 703-002, 7325-102, and 7335-002 Multi-Party 24 V DC Amplifier Enclosures Pub. Follow the wire colors carefully, because the colors correspond to GAI-Tronics 60029 Series multi-party cable. The wires must be spade-lugged and connected carefully and completely to the terminal block. An improper termination may diminish station performance. Local Muting Figure 4 illustrates local speaker muting when stations are completely assembled and paging operation occurs. Normally, when the station button is pressed, the paging speaker connected to that station is silenced (muted) to prevent acoustic feedback to the handset microphone. However, while the handset is in use for party line conversations, the paging speaker is "live" to enable paging calls from other stations. Locate the lugged violet wire attached to terminal point 7 (Mute) on the terminal block within the enclosure. After any muting changes are made, unpack the station amplifier and install. Mutual Muting In the event that feedback occurs within an area and repositioning of the system speakers does not help, mutual muting may be used to correct this problem. The following steps mutually mute adjacent amplifiers/handsets within a zone. Connect terminal TB1-7 of the handset station to TB1-7 of the station within the zone that is causing feedback. This is done by using the spare system wire (orange conductor) from within the system cable that runs between the stations. f:\standard ioms - current release\42004 instr. manuals\42004-141f. doc 11/10 Model 703-002, 7325-102, and 7335-002 Multi-Party 24 V DC Amplifier Enclosures Pub. manuals\42004-141f. doc 11/10 Model 703-002, 7325-102, and 7335-002 Multi-Party 24 V DC Amplifier Enclosures Pub. [. . . ] The applicability of any such third-party warranty will be determined by GAI-Tronics. Services. Any services GAI-Tronics provides hereunder, whether directly or through subcontractors, shall be performed in accordance with the standard of care with which such services are normally provided in the industry. If the services fail to meet the applicable industry standard, GAI-Tronics will re-perform such services at no cost to buyer to correct said deficiency to Company's satisfaction provided any and all issues are identified prior to the demobilization of the Contractor's personnel from the work site. Re-performance of services shall be Buyer's sole and exclusive remedy, and in no event shall GAITronics warranty obligations with respect to services exceed 100% of the total cost of the services provided hereunder. Warranty Periods. Every claim by Buyer alleging a defect in the goods and/or services provided hereunder shall be deemed waived unless such claim is made in writing within the applicable warranty periods as set forth above. Provided, however, that if the defect complained of is latent and not discoverable within the above warranty periods, every claim arising on account of such latent defect shall be deemed waived unless it is made in writing within a reasonable time after such latent defect is or should have been discovered by Buyer. Limitations / Exclusions. The warranties herein shall not apply to, and GAI-Tronics shall not be responsible for, any damage to the goods or failure of the services supplied hereunder, to the extent caused by Buyer's neglect, failure to follow operational and maintenance procedures provided with the equipment, or the use of technicians not specifically authorized by GAI-Tronics to maintain or service the equipment. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GAI-TRONICS 7325-102




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GAI-TRONICS 7325-102 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.