Detailed instructions for use are in the User's Guide.
[. . . ] Back
MULTI DISPLAY
RD-30
Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : fax : 0798-65-2111 0798-65-4200
All rights reserved.
Printed in Japan
FIRST EDITION : MAR. OME-44130 ( DAMI ) RD-30
*00080917705* *00080917705*
*00080917705*
*OME44130H00* *OME44130H00*
*OME44130H00*
SAFETY INSTRUCTIONS
WARNING
Do not open the equipment. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. A heater can melt the equipment's power cord, which can cause fire or electrical shock.
CAUTION
Do not use the equipment for other than its intended purpose. [. . . ] For ON, press the [ENT] key and then use the cursor pad to enter the alarm setting: Use or to select location, and press or to enter value. Note: Speed through water must be more than 0. 09 kt to calculate odometer distance.
1. 7. 9
Time alarm
The time alarm works like an alarm clock, generating visual and audio alarms when the preset time arrives. Select TIME and then press the [ENT] key to show the time alarm options window. For ON, press the [ENT] key and then use the cursor pad to enter the time you want for the alarm: Use or to select location, and press or to enter value. Press the [MENU] key twice to close the menu.
1. 7. 10
Countdown alarm
The countdown alarm generates audio and visual alarms when the preset time has elapsed. Select COUNTDOWN and then press the [ENT] key to show the countdown alarm options window. For ON, press the [ENT] key to show the countdown alarm options window. Select 5, 10 or 15 (minutes) as appropriate and then press the [ENT] key. OPERATION
1. 7. 11
Alarm messages
When an alarm setting is violated the audio alarm sounds and the name of the offending alarm and a flashing exclamation mark appear at the top of the display. You can silence the audio alarm and erase the alarm name by pressing any key. The exclamation mark remains on the screen until the offending alarm is turned off or the cause of the alarm is eliminated. You can see which alarm has been violated by displaying the message display, which can show up to ten messages. Select MESSAGES and then press the [ENT] key.
MESSAGES
ARRIVAL ALARM!
Messages display 3. Note: "NO FIX!" appears when a navigation device connected to the RD-30 can not fix the ship's position. "NO POSITION DATA!" appears when the own ship's position data has not been input from a navigation device for 90 seconds.
1-21
1. OPERATION
1. 8 Resetting Indications to Zero
You may individually reset the trip, odometer and graph indications to zero as follows: 1. Select TRIP, ODOMETER or GRAPH as appropriate and then press the [ENT] key. One of the following displays appears depending on your selection.
RESET TRIP?
ARE YOU SURE?
RESET ODOMETER?
ARE YOU SURE?
YES
NO
YES
NO
ALL?USER DISP5?
Windows for resetting trip, odometer and graph displays 4. For TRIP and ODOMETER, press to select YES and then press the [ENT] key. For GRAPH, select specific display number (USER DISP1-USER DISP5) or ALL (resets all graphs) as appropriate and then press the [ENT] key. Press to select YES and then press the [ENT] key.
ERASE GRAPH DATA
ARE YOU SURE?
YES
NO
Reset graph prompt 5. [. . . ] RANGE (1-999, 30 kt) PERIOD (5, 30 min; 1, 3, 6, real) START FROM (0-998, +0 kt) MAX. RANGE (1-999, 20 kt) PERIOD (5, 30 min, 1, 3, 6, real) START FROM (0-998, +0 kt) MAX. RANGE(1-999, 10 kt) PERIOD (5, 30 min, 1, 3, 6, real) START FROM (0800-1199, 0 hpa) MAX. RANGE(0801-1200, 1200 hpa) PERIOD (5, 30 min, 1, 3, 6, 12, 24, 48, 72, real, 5 min) START FROM (-99. 0 - +99. 0, +0) INTERVAL (1-99, 10)
DEPTH
SOG
STW
WIND
CURRENT
PRESSURE
GRAPHIC SPDMETER1 SPDMETER TEMP WIND COMPASS CURRENT SPD(SOG) SPD(STW) ROT (30°, 60°, 90°/min) RAI HIGHWAY
ALARM1
BUZZ (SHORT, LONG, CONTIN. ) SPEED (OFF, 30. 0 kt, LOW, HIGH, INSDE, OUTSD) TEMP (OFF, +32. 00°F, LOW, HIGH, INSDE, OUTSD, SHEAR) DEPTH (OFF, 0. 0 ft, LOW, HIGH, INSDE, OUTSD) ARV/ANC (ARV, ANC, OFF, 0. 50 nm) XTE (OFF, 0. 25 nm, ON) TRIP (OFF, 0 nm, ON) ODOMETER (OFF, 0 nm, ON) TIME (OFF, 00:00, ON) COUNTDOWN (OFF, ON, 5 min, 10 min, 15 min)
ALARM2
MESSAGES (Message board) RESET
TRIP? [. . . ]