User manual FURUNO NAVNET 1834C-BB REFERENCE GUIDE

[. . . ] SAFETY INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Post a warning sign near the switch indicating it should not be turned on while the antenna unit is being serviced. Prevent the potential risk of being struck by the rotating antenna and exposure to RF radiation hazard. Serious injury or death can result if someone falls from the radar antenna mast. [. . . ] Operate the Trackball to place the cursor on the first (or last) waypoint of the route. A flashing diamond appears over the waypoint when it is correctly selected. Press the C: ADD TO START soft key or the C: ADD TO END soft key depending on the waypoint you selected at step 7. Operate the Trackball to place the cursor on an existing waypoint (C: ADD WPT soft key appears) or new location (C: ADD NEW WP soft key appears). Follow steps 1 through 6 in "Inserting a waypoint before the first or last waypoint in a route. " 2. Operate the Trackball to place the cursor on a line connecting waypoints. The C: SPLIT LEG soft key appears and the line flashes when it is correctly selected. Move the cursor to a new location or select an existing waypoint, in which case the C: INSERT WPT soft key replaces the C: INSERT NEW WP soft key. 8. Removing waypoints from a route Removing a waypoint from the route list Press the MENU key to open the menu. Press the MENU key to close the menu. Removing a waypoint from the plotter display 1. Operate the Trackball to place the cursor on the waypoint you want to remove from the route. Press the MENU key to close the menu. 3. 10 Navigation This section shows you how to get to a desired destination by "quick points, " waypoints, port services and routes. Note: Reciprocal setting and canceling of destination is available by outputting the data sentence ZDA from the NavNet unit connected to the navigator. 3. 10. 1 Navigating to a "quick point" The "quick point" feature allows you to navigate to point(s) without retaining the data indefinitely in your unit's memory. Selecting quick point entry method You need to tell your unit how to set the quick point: 1 POINT, 35 POINTS (up to 35 points) or 35PTS/FIND. (For how to navigate to points/port services see "3. 10. 3 Navigating to ports, port services" on page 3-41. ) 1. Use the Trackball to select SET GOTO METHOD, then press the A: EDIT soft key. GOTO METHOD 1 POINT 35 POINTS 35PTS/PORT SVC* *For C-map: "FIND" Go to method window 4. Place the cursor on an existing waypoint (D: GOTO WPT soft key appears) or a new location (D: GOTO CURSOR soft key appears). Select "1 POINT" following the procedure in the above paragraph. Depending on the selection you made at step 1, press the D: GOTO CURSOR or D: GOTO WPT soft key. A solid blue line with arrows connects between own ship and destination, which is marked as "<QP01>" for cursor-selected location or waypoint name in case of waypoint. Arrows on the line show the direction to follow to get to the quick point. Range and bearing from own ship to the destination appear at the top of screen. [. . . ] soft key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Interference rejection radar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 sounder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Keyboard test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11 Keying pulse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-32 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Latitude, longitude display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Lines entering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 erasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26 type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 LOAD DATA menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 Lost target alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33 Magnetic variation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Maintenance battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 fuse replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 preventive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Trackball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Marker-zoom display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 IN-2 INDEX Marks color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 Memory clearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]