User manual FURUNO LS-6100

[. . . ] 6" ECHO SOUNDER LS-6100 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : Telefax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : FEB. OME-23690 ( DAMI ) LS-6100 *00080926502* *00080926502* *00080926502* *OME23690C00* *OME23690C00* *OME23690C00* TABLE OF CONTENTS FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii SYSTEM OVERVIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv 1. OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1 Control Description . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2 Turning the Power On/Off . . . . . . . . . . . . . . . . 1 1. 3 Adjusting Display Contrast, Brilliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 4 Choosing a Display, Frequency. . . . . . . . 2 1. 5 Menu Operating Procedure . . . . . . . . . . . . . . 5 1. 6 Automatic Operation . . . . . . . . . . . . . . . . . . . . . . . . 5 1. 7 Manual Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1. 8 Choosing Picture Advance Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1. 9 Measuring Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1. 10 A-scope Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1. 11 Suppressing Interference . . . . . . . . . . . . . . . . . 9 1. 12 Suppressing Low Level Noise . . . . . . . . . . 9 1. 13 Erasing Weak Echoes. . . . . . . . . . . . . . . . . . . . 10 1. 14 White Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1. 15 Waypoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1. 16 PROG Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1. 17 Picture Color (Hue) . . . . . . . . . . . . . . . . . . . . . . . . 13 1. 18 Deep Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1. 19 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1. 20 Resetting Trip Distance . . . . . . . . . . . . . . . . . . 15 1. 21 Setting the Draft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1. 22 Gain Compensation . . . . . . . . . . . . . . . . . . . . . . . 15 1. 23 Setting Up Nav Data Displays . . . . . . . . 16 2. 30 4. 6 Optional Water Temperature/Speed Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You may choose from temperature/speed, latitude/longitude, range and bearing, course over ground, trip distance or wind speed. Requires appropriate nav data. 40. 7°F 16. 2kt WIND SPD/DIR: Choose the wind speed and direction reference from true and apparent. Apparent: The direction (in relation to ship's bow) and speed of the wind as it appears to those on board, relative to the speed and direction of the boat; combination of the true wind and the wind caused by the boat's movement. True: The speed and direction (in relation to ship's bow) of the wind felt or measured when stationary. TRIP SOURCE: Choose speed source for the trip distance indication; Own (transducer w/speed sensor or separate speed sensor) or NMEA. TEMP SOURCE: Choose source of water temperature input; Off, Own (transducer w/water temperature sensor or separate temperature sensor), or NMEA. SPEED SOURCE: Choose source of speed input; Off, Own (transducer w/speed sensor or separate speed sensor), or NMEA. TEMP CALIB. : If the water temperature sensor-generated water temperature indication is wrong, you can correct it here, when "Own" is selected as temperature source. For example, if the water temperature indication is 2° higher than actual water temperature, enter -2. SPEED CALIB. : If the speed sensor-generated speed indication is wrong, you can correct it here, when "Own" is selected as speed source. For example, if the speed indication is 10% lower than actual speed, enter +10. The setting range is ­50% to +50%. Nav window (water temperature and speed) NMEA0183: Choose NMEA version of navigator; Ver. TLL OUTPUT: Enables/disables output of TLL (Target Latitude, Longitude) position when the [MARK] key is operated. "FURUNO-TLL, " available with connection of navigator that can output FURUNO TLL, outputs latitude and longitude, water temperature, depth, etc. BEARING: Ship's course and bearing to a waypoint may be displayed in true or magnetic bearing. Magnetic bearing is true bearing plus (or minus) earth's magnetic deviation. Requires bearing data. 19 Page 3 BASIC RANGE 1 - BASIC RANGE 8: Set range of each of the eight basic ranges. Note 1: All default basic ranges are restored whenever the depth unit is changed. For example, if basic range 3 is 60 feet, basic range 4 must be greater than 60 feet. ZOOM RANGE: Choose the range to zoom in the marker-zoom and bottom-zoom modes. B/L RANGE: The expansion width for the bottom-lock display can be chosen from 10 to 30 feet (3 and 10 meters). ZOOM MARKER: The zoom marker appears in the normal, bottom marker and bottom zoom displays and marks the area which is expanded in the bottom marker and bottom zoom pictures. [. . . ] Therefore, when connecting external equipment having positive ground, do not ground the signal line to the chassis. In this case, attach a steel plate measuring 20 cm by 30 cm on the outside of the hull to provide a ground point. Use a "closed" type lug ( make the connection at the display unit. Do 34 not use an "open" type lug ( ). Optional equipment Pin arrangement on NMEA port Connector 1 2 3 4 5 6 7 TD-A TD-B RD-A RD-B +Vout GND FG Remarks IEC-61162-1/NMEA0183 IEC-61162-1/NMEA0183 Power output max. [. . . ]