User manual FURUNO GP-150

[. . . ] GPS NAVIGATOR GP-150 The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya 662-8580, JAPAN Telephone : Fax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : FEB. OME-44400 ( HIMA ) GP-150 *00015801400* *00015801400* *00015801400* *OME44400A00* *OME44400A00* *OME44400A00* IMPORTANT NOTICE · This manual is intended for use by native speakers of English. · No part of this manual may be copied or reproduced without written permission. · If this manual is lost or worn, contact your dealer about replacement. [. . . ] If the data contains error, and all nines appear as the calculation results. SETTING UP VARIOUS DISPLAYS 6. 1 Selecting Data to Display on the Data Display · · · · · · · · Speed thru water (STW) Time-to-go to waypoint (TTG) ETA to route Total route distance (RT. DIST)* Trip distance (TRIP) Trip elapsed time (TRIP TM) Water temperature (W. TMP)#, and Velocity to destination (VTD)* The user may select what data to display in four locations on the data display. JAN 12, 2006 23:59'59" U POSITION D3D SAFE 100m WGS84 RNG 12 23. 456' N 123 23. 456' E BRG *ALT: Displayed only in 3D position fixing. *VTD: When following a route, plus or minus appears next to indication to denote which direction the route is being traversed. 1) Press MENU ESC, 9 and 1 to display the PLOTTER SETUP menu. PLOTTER SETUP Memory Apportion Trk = 1000 / 2000Pt TO : 001 MARINE POINT1 NEXT 31. 23 nm SOG 223. 4 COG : 002 12. 3 kt 123. 4 MARINE POINT2 User-defined User-defined display data #1 display data #4 User-defined display data #2 User-defined display window User-defined display data #3 Bearing Ref. Mag Variation Calculation User defined #1 User defined #2 User defined #3 User defined #4 True Mag Auto (07 W) R. L SOG COG RNG BRG Man (00 E) G. C Figure 6-1 Data display The data the user may select to display are; · · · · · · · · · · · · · · · Altitude (ALT)* Average course (AVR COG) Average speed (AVR SOG) Course (COG) Course error (dCOG) Cross track error (XTE) Depth (W. DPT)# Drift (DFT) ETA to waypoint (ETA) Heading (HDG) Range to waypoint (RNG) Bearing to waypoint (BRG) Route time-to-go (RT. TTG) Set (SET) Speed over ground (SOG) ENT:Enter MENU:Escape Figure 6-2 PLOTTER SETUP menu 2) Press or to select one of four of "User defined" (#1, #2, #3, #4). To select the data to display at other user defined displays, repeat steps 2 and 3. SETTING UP VARIOUS DISPLAYS 6. 2 Selecting Position Format 1 For Loran LOPs Position can be displayed in latitude and longitude, Loran C LOPs, or Decca LOPs, and the default format is latitude and longitude. Selecting position format (L/L or LOPs) 1) Press MENU ESC, 9 and 8 to display the LOP SETUP menu. LOP SETUP Lat / Long Pos Display LOP LOP Display LC DE LC Chain 7980 : 23-43 LOP -12. 3us +0. 34 us DE Chain 24:G - P LOP +0. 80 Lane -1. 00 Lane 6) Press to select LC Chain. 7) Key in GRI code referring to the Loran C chain list appears in the Appendix. 8) Key in secondary code pair referring to the Loran C chain list in the Appendix. 13)Press the MENU ESC key. 2 For Decca LOPs (RED:1 GREEN:2 PURPLE:3) : Select MENU : Escape ENT : Enter : +/- Figure 6-3 LOP SETUP menu 2) Press or to select Pos Display. 4) Press the NU/CU ENT key. Displaying LOPs 1) 2) 3) 4) 5) Press MENU ESC, 9 and 8. Press or to select LC (Loran C) or DE (Decca). 6) Press to select DE Chain. 7) Key in Decca chain number referring to the Decca chain list in the Appendix. 13) Press the MENU ESC key. Follow 1 or 2 in the adjacent column according to selection in step 5. 6-2 6. SETTING UP VARIOUS DISPLAYS Registering waypoints using LOPs 1) Press WPT RTE and 5. 2) Press WAYPOINT LIST (LOP, LC) 001 36365. 2 59102. 3 MARINE POINT AUG12' 95 12 : 35U 002 36512. 3 ___ A POINT 59134. 5 AUG13' 95 13 : 45U 003 _ _ _ _ _ , _ _____, _ ___ _ _ _ _ _ _ _ _ _ _ _ _ 004 _ _ _ _ _ , _ _____, _ ___ _ _ _ _ _ _ _ _ _ _ _ _ : L/L LOP ENT : Enter : Edit MENU : Escape Figure 6-4 LOP display on the waypoint list 3) Press or to select waypoint number. Your display should look like one of the displays in Figure 6-5. Edit=Waypoint : 001 5) Key in LOP1 and LOP2, to enable calculation. "Calculating" 6) Press appears between parentheses during the calculation. Actual LOPs replace "Calculating" upon completion of the calculation. If the conversion fails, the message "Failed in Conversion" appears for three seconds. Waypoint data and date and time registered appear. LC8930 : 30 50 3 58654. 3 3 8931. 2 (34° 12. 345' N 130° 23. 456' E) Mark : Cmnt : MARINE POINT : Cursor ENT : Enter : Column MENU : Escape Loran C LOP input screen Edit=Waypoint : 001 DE : 32 (9C) RED GREEN 1 A:12. 23 1 2H:24. 35 (34° 12. 345' N 130° 23. 456' E) Mark : Cmnt : MARINE POINT ABCDEFGHIJ 1, 2 ~ 9, 0 : Cursor : Column ENT : Enter MENU : Escape Decca LOP input screen Figure 6-5 LOP input screens 6-3 6. SETTING UP VARIOUS DISPLAYS 6. 3 Demo Display The demo display provides simulated operation of this unit. Own ship tracks, at the speed selected, a figure eight course, starting from position entered. [. . . ] Checksum AP-17 APPENDIX VDR ­ Set and drift $--VDR, x. x, T, x. x, M, x. x, N*hh<CR><LF> || | | ||| | | | | | | +--------- 4 | | | | +--+----------- 3 | | +--+----------------- 2 +--+----------------------- 1 1. Checksum VHW ­ Water speed and heading $--VHW, x. x, T, x. x, M, x. x, N, x. x, K*hh<CR><LF> | | | | || ||| | | | | | | | | +--------- 5 | | | | | | +--+----------- 4 | | | | +--+----------------- 3 | | +---+----------------------- 2 +---+----------------------------- 1 1. Checksum VTG - Course over ground and ground speed $--VTG, x. x, T, x. x, M, x. x, N, x. x, K, a*hh<CR><LF> || || | | |||| | | | | | | | | | +------- 6 | | | | | | | | +--------- 5 | | | | | | +--+----------- 4 | | | | +--+----------------- 3 | | +--+----------------------- 2 +--+----------------------------- 1 1. Checksum NOTE Positioning system Mode indicator: A = Autonomous D = Differential S = Simulator N = Data not valid The positioning system Mode indicator field shall not be a null field. AP-18 APPENDIX WCV - Waypoint closure velocity $--WCV, x. x, N, c--c, a*hh<CR><LF> | | | || | | | | | | +------- 4 | | | | +--------- 3 | | +--+----------- 2 +--+---------------- 1 1. [. . . ]