User manual FURUNO FI-3003 OPERATORS MANUAL

[. . . ] 0 1 2 FI-30 Wind transducer Thank you for choosing a FURUNO product. [. . . ] In addition, a compass or GPS antenna may be used to compute true wind direction relative North 1 Installation 1. 1 Location The transducer should be mounted on a horizontal surface in the mast head. The wind transducer is using optical sensor technology performing digital PWM output. This technique provides high accuracy angle and wind speed measurements. 2 Part specification 1# Calibration certificate 1# Wind transducer with 25 m cable 1# Bracket 5# Cable protectors (0, 25 mm) 3 INSTALLATION The transducer permits any type of horizontal mounting angle. Mount the unit by directing the pipe (1) down and backwards in the bracket (2). Secure the nut (3) towards the attachment BY HAND (tools can be needed when demounting). The wind transducer connects to the FI-30 Server. 3 4 Electric installation 4. 1 Connections to the FI-30 Server If you already have a Nexus Network i. e. [. . . ] Note, set C71 On (see Multi Control Manual) Always connect a 3 AMP fuse between Power supply and instrument. 4 5 Specifications 25 m 12V DC (10-16V) 0. 25 W 0. 9-90 knots, 0. 5-50 m/s Better than ± 5% Operating -5°C to +70°C Storage -20°C to +80°C 260 g. Transducer cable Power suppIy Power consumption Wind speed range Angle Accuracy Speed Accuracy Temperature range Weight 5. 1 Dimensions: 5 6 7 22346-1 Edidtion 1 [. . . ]