User manual FURUNO FCV-1200LM
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FURUNO FCV-1200LM. We hope that this FURUNO FCV-1200LM user guide will be useful to you.
You may also download the following manuals related to this product:
FURUNO FCV-1200LM OPERATORS MANUAL (1587 ko)
Manual abstract: user guide FURUNO FCV-1200LM
Detailed instructions for use are in the User's Guide.
[. . . ] Back
COLOR LCD SOUNDER
FCV-1200L/1200LM
Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : Telefax : 0798-65-2111 0798-65-4200
All rights reserved.
Printed in Japan
FIRST EDITION : APR. OME-23650 ( DAMI ) FCV-1200L/LM
*00080900501* *00080900501*
*00080900501*
*OME23650N00* *OME23650N00*
*OME23650N00*
SAFETY INSTRUCTIONS
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment. Immediately turn off the power at the switchboard if water leaks into the equipment or something is dropped in the equipment. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. [. . . ] When the bottom is rough, the bottom echo may be displayed too thinly if the display shift setting is "1/4. ". In this case use the "1/2" setting to display the bottom echo clearly.
1/5
1/3
3/4 Display range is shifted downward when the bottom echo comes to the location 1/5 of the display When the bottom echo comes to the bottom of the screen, the display range is shifted downward.
Automatic shift (1/2)
DISPLAY DATA
Selects the data to display at the left top corner of the screen among OFF, L/L*, TD*, TIMER (Elapsed time from the moment when the [MARKER/TLL] key is pressed), GAIN**, R/B* (range and bearing to the waypoint) and COURSE*. **: The gain setting shown on the display may not agree exactly with GAIN controller position. When you change the gain setting and then return correctly, using of the setting shown on the display is recommended.
2-5
SCROLL TIME
Turns the display scroll time on/off. Scroll time displays, at the screen bottom, the amount of time a scan line stays on the screen as it passes from one side of the screen to the other. Time varies with the range and picture advance speed.
SMOOTHING-1
This setting can only be changed when the picture advance speed is set to 1/16, 1/8, 1/4, 1/2 or 1/1. Adjust the setting when echoes appear "spotty. "
SMOOTHING-2
This setting can only be changed when the picture advance speed is set to 2/1, 3/1 or 4/1. Select ON when rough echoes appear.
2-6
2. 3
[-], [+], [
ALM Menu
] or [ ] key.
Sets the alarms; BOTTOM, FISH and TEMP (temperature). To silence the alarm beep, press the
BOTTOM ALARM
When your ship comes in the area of the selected depth, the beep sounds and the indication BTM flashes at the top right corner to draw your attention.
FISH ALARM
FISH ALARM: Fish echoes of yellow or stronger colors (default setting) trigger the alarm. BTM-FISH ALARM: When fish echoes come in the area which you set above the bottom, the beep sounds and the indication FISH flashes at the top right corner of the screen. (Available mode: bottom lock, discrim 1/2, discrim 1/3)
TEMP ALARM
Selects temperature range which triggers temperature alarm. Alarm is activated (beep sounds and the indication TEMP appears at the top right corner of the screen) when water temperature is above (UP) or below (DOWN) the preset value. 3.
Setting the alarm
Rotate the [FUNCTION] switch fully clockwise to select MENU. Press the [-] or [+] key to select ALM to display the ALM menu.
2-7
DISP ALM TX/RX USER-1/2 SYSTEM BOTTOM ALARM : OFF ALARM DEPTH : 0 ft * ALARM ZONE : 10 ft FISH ALARM ALARM DEPTH ALARM ZONE ALARM LEVEL : OFF : 0 ft : 10 ft * : MID
TEMP ALARM : OFF TEMP LIMIT : 65. 0°F(20~95) * ALARM ZONE : 1. 0°F Menu for alarm setting. [-/+]: Change set, [EXIT (knob)]: Exit *: The setting is not available when ALARM is OFF.
ALM (Alarm) menu 4. Press the [-] or [+] key to show the alarm setting window.
OFF ON OFF FISH BTM-FISH
OFF WITHIN RANGE
OUT OF RANGE
Bottom alarm
Fish alarm
Temp alarm
Alarm setting window 6. Press the [ ] key twice to select ALARM DEPTH (TEMP LIMIT for temp alarm). Press the [-] or [+] key to show the alarm setting window.
0 ft
Starting depth setting window (ex. For BOTTOM ALARM and FISH ALARM, press the [-] or [+] key to set the starting point of alarm zone.
Alarm marker appears (Depth alarm: green, Fish alarm: white).
2-8
Selected alarm (flashing)
BTM
Start line
Alarm area
Alarm marker Bottom alarm (green): right side
12. 5ft
Fish alarm (white): right side Bottom-fish alarm (white): left side (vertical screen division) right side (horizontal screen division)
Setting of alarm zone (ex. Press the [-] or [+] key to show the alarm zone setting window.
10 ft
Alarm zone setting window (ex. Press the [-] or [+] key to set the alarm zone.
For depth alarm and temp alarm, go to step 16. Press the [-] or [+] key to show the level setting window.
MIN MID MAX
Level setting window 15. [. . . ] Select INTERNAL at HF/LF XDCR CONNECT on ES/DRAFT SETTING menu.
AP-6
(two split screen)
(half) (1:2)
H N O R M A L HIGH NORMAL L N O R M A L LOW NORMAL
H Z O O M
L Z O O M
HIGH ZOOM
LOW ZOOM
[HF]: Zm/Nor ET T/S R Z O O M ET T/S R
N O R M A L
[LF]: Zm/Nor
ETR/ TELESOUNDER NORMAL ETR/ TELESOUNDER ZOOM
L N O R M A L
H N O R M A L [LF]+[HF]
HIGH NORMAL
LOW NORMAL
*[Ex]: Zm/Nor ET T/S R
N O R M A L
H N O R M A L
HIGH NORMAL ETR/ TELESOUNDER NORMAL
ET T/S R
N O R M A L
L N O R M A L
LOW NORMAL ETR/ TELESOUNDER NORMAL
*[Ex]+[HF]
*[Ex]+[LF]
L Z O O M
H Z O O M
HIGH ZOOM
H N O R M A L
M I X N O R [HF]+[Mix]
MIX NORMAL
LOW ZOOM
HIGH NORMAL
[LF]:Zm+[HF]:Zm
L N O R M A L
M I X N O R [LF]+[Mix]
MIX NORMAL
H H S U B N O R M A L
HIGH NORMAL
LOW NORMAL
HIGH SUB
[H]sub+[HF]
L L S U B N O R M A L
LOW NORMAL
Tbe dashed line shows position of dividing line for vertical (1:2) split screen.
LOW SUB
[L]sub+[LF]
*: For FCV-1200L with EXIF assy. Select INTERNAL at HF/LF XDCR CONNECT on ES/DRAFT SETTING menu.
AP-7
(three split screen)
L N O R M A L H Z O O M N O R M A L H HIGH NORMAL HIGH ZOOM LOW NORMAL L Z O O M L N O R M A L H N O R M A L HIGH NORMAL LOW NORMAL LOW ZOOM
[LF]+[HF]: Zm/Nor ET T/S R
N O R M A L
[LF]: Zm/Nor+[HF] ET T/S R
N O R M A L
H H Z O O M N O R M A L
HIGH NORMAL HIGH ZOOM ETR/ TELESOUNDER NORMAL
L L Z O O M N O R M A L
LOW NORMAL LOW ZOOM ETR/ TELESOUNDER NORMAL
*[Ex]+[HF]: Zm/Nor E TE T T/S T/S R R Z O O M
N O R M A L
*[Ex]+[LF]: Zm/Nor
H N O R M A L
HIGH NORMAL ETR/ TELESOUNDER NORMAL ETR/ TELESOUNDER ZOOM
E TE T T/S T/S R R Z O O M
N O R M A L
L N O R M A L
LOW NORMAL ETR/ TELESOUNDER NORMAL ETR/ TELESOUNDER ZOOM
*[EX]:Zm/Nor+[HF]
*[EX]:Zm/Nor+[LF]
ET T/S R
N O R M A L
L N O R M A L
H N O R M A L
HIGH NORMAL LOW NORMAL ETR/ TELESOUNDER NORMAL
L N O R M A L
H N O R M A L
M I X N O R
MIX NORMAL HIGH NORMAL LOW NORMAL
*[Ex]+[LF]+[HF]
[LF]+[HF]+[Mix]
L N O R M A L H S U B
H N O R M A L
HIGH NORMAL HIGH SUB LOW NORMAL
L L S U B N O R M A L
H N O R M A L
HIGH NORMAL LOW NORMAL LOW SUB
[LF]+[H]sub+[HF]
[L]sub+[LF]+[HF]
*: For FCV-1200L with EXIF assy. Select INTERNAL at HF/LF XDCR CONNECT on ES/DRAFT SETTING menu.
(four split screen)
LOW NOR
HIGH NOR
LOW ZOOM
HIGH ZOOM
[LF]: Zm/Nor+[HF]: Zm/Nor
AP-8
APPENDIX 3
menu.
DISPLAY DIVISION
The display is arranged as shown below through DISP DIVISION on the SYSTEM SETTING
LF or HF
DUAL
ZOOM
NORMAL
LOW/HIGH
LOW
HIGH
ZOOM
LOW/ HIGH
SONDE WATER TEMP "ON"
S O N D E
LOW/ HIGH
S O N D E
LOW HIGH
S O N D E
Z O O M
H I G H / L O W
A A-SCOPE "ON" LOW/HIGH S C O P E LOW HIGH
A S C O P E Z O O M
H I G H / L O W
A S C O P E
The width of the sonde temperature display may be set to 1/4 or 1/2 the screen size. When Sonde temperature display is set to 1/2, and the A-scope is turned on, the width of the sonde temperature display becomes 1/4 automatically.
AP-9
LF or HF
DUAL
ZOOM
HIGH NORMAL LOW/HIGH LOW
LOW/HIGH
ZOOM
SONDE WATER TEMP "ON"
S O N D E
LOW/ HIGH
S O N D E
HIGH
LOW
S O N D E
LOW/ HIGH
ZOOM
A A-SCOPE "ON" LOW/ HIGH S C O P E
HIGH
A S C O P E
LOW/ HIGH
A S C O P E
LOW
ZOOM
The width of the sonde temperature display may be set to 1/4 or 1/2 the screen size. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FURUNO FCV-1200LM
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FURUNO FCV-1200LM will begin.