User manual FURUNO FCV-1100L

[. . . ] Back COLOR LCD SOUNDER FCV-1100L C Your Local Agent/Dealer 9-52, Ashihara -cho, Nishinomiya, Japan Telephone: Telefax: 0 7 9 8 - 6 5 - 2111 0798-65-4200 All rights reserved. Printed in Korea FIRST EDITION C2 : : AUG. O M E -2 3 6 7 0 (HIMA) F C V -1100L SAFETY INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Immediately turn off the power at the switchboard if water leaks into the equipment or something is dropped in the equipment. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. [. . . ] MENU OPERATION 2. 3 ALM Menu The ALM menu sets the bottom, fish and water temperature alarms. BOTTOM ALARM When your ship comes in the area of the chosen depth, beeps sound and the indication "BTM" flashes at the top right corner to draw your attention. FISH ALARM FISH ALARM: Fish echoes of yellow or stronger colors (default setting) trigger the alarm. BTM-FISH ALARM: When fish echoes come in the area which you set above the bottom, beeps sound and the indication "FISH" flashes at the top right corner of the screen. (Available modes: bottom lock, discrim 1/2, discrim 1/3) TEMP ALARM Chooses temperature range which triggers temperature alarm. Audio and visual ("TEMP") alarms are released when water temperature is within the range or out of the range of the preset value. This function requires a water temperature sensor. 2. 3. 1 Setting the alarm 1. Press the [-] or [+] key to choose ALM to display the ALM menu. DISP ALM TX/RX E/S SYSTEM BOTTOM ALARM : OFF ALARM DEPTH : 0 ft * ALARM ZONE : 10 ft FISH ALARM ALARM DEPTH ALARM ZONE ALARM LEVEL : OFF : 0 ft : 10 ft * : MID TEMP ALARM : OFF TEMP LIMIT : 65. 00°F(20~95) * ALARM ZONE : 1. 00°F Menu for alarm setting. [-/+]: Change set, [EXIT]: Exit *: The setting is not available when ALARM is OFF. ALM (Alarm) menu 2-6 2. Press the [-] or [+] key to show the alarm setting window. OFF ON OFF FISH BTM-FISH OFF WITHIN RANGE OUT OF RANGE Bottom alarm Fish alarm Temp alarm Alarm setting window 6. Press the [] key twice to choose ALARM DEPTH (TEMP LIMIT for temp alarm). Press the [-] or [+] key to show the alarm setting window. 0m Starting depth setting window (example: bottom alarm) 9. For BOTTOM ALARM and FISH ALARM, press the [-] or [+] key to set the starting point of alarm zone. The starting depth is measured from the transducer surface for BOTTOM ALARM and FISH ALARM, from the bottom for BTM-FISH (bottom fish) alarm. Selected alarm (flashing) BTM Alarm area Start line Alarm marker Bottom alarm (green): right side 12. 5ft Fish alarm (white): right side Bottom-fish alarm (white): left side (vertical screen division) right side (horizontal screen division) Setting of alarm zone (ex. Press the [-] or [+] key to show the alarm zone setting window. 10 ft Alarm zone setting window (ex. Press the [-] or [+] key to show the level setting window. MIN MID MAX Level setting window 2-7 2. To cancel an alarm, choose OFF at step 6, then rotate the [FUNCTION] switch to choose EXIT. Note: When multiple alarms are set, the buzzer sounds against the alarm set second (or third). 2. 4 TX/RX Menu The TX/RX menu adjusts pulse repetition rate, STC, gain, RX band, TX pulse and pulselength. DISP ALM TX/RX E/S SYSTEM *: The setting is available when MANUAL is selected at TX PULSE. PRR LEVEL : <High Frequency> STC : GAIN ADJ : RX BAND : TX PULSE : PULSE LENGTH : <Low Frequency> STC : GAIN ADJ : RX BAND : TX PULSE : PULSE LENGTH : 20 (0~20, S) 0 (0~10) +0 STD STD 0. 2 msec (0. 2~5. 0)* 0 (0~10) +0 STD STD 0. 2 msec (0. 2~5. 0)* Menu for TX/RX setting. [-/+]: Change set, [EXIT]: Exit TX/RX menu PRR LEVEL Changes pulse repetition rate. When in shallow waters, second reflection echoes may appear between surface and actual bottom echo. The option "S" means the ship's speed dependent mode, where the PRR changes automatically with ship's speed. (Requires speed input. ) For further information about the ship's speed dependent mode, see page 1-19. [. . . ] Single mode (high/low frequency), Dual-frequency, Zoom, Mix, A-scope Marker zoom, Bottom zoom, Bottom-lock expansion Range: 5-2000 m, Shift: 0-2000 m, Expansion range: 5-200 m 2. 7. Display Advance Speed 7 steps (Lines/TX: Freeze, 1/16, 1/8, 1/4, 1/2, 1/1, 2/1, 3/1, 4/1) Fish alarm, Water temperature alarm, Bottom alarm Frequency adjustable range: ±10% or -10. 0 to +6% for 28 kHz, -4. 0 to +10% for 67/68 kHz, -10. 0 to +4% for 107 kHz, -9. 0 to +10% for 200 kHz 2. 10. Automatic Indication Full-auto, Automatic bottom tracking, Water temperature graph (optional sensor required) 3. Output Data IEC 61162-1, NMEA0183 Ver. 1. 5/2. 0/3. 0 GGA, GLC, GLL, GTD, MTW, RMA, RMB, RMC, BWC, VTG, VHW, XTE. [. . . ]