User manual FURUNO CSH-23F OPERATORS MANUAL

[. . . ] COLOR SCANNING SONAR MODEL CSH-23F/24F Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : Telefax : 0798-65-2111 0798-65-4200 All rights reserved. Printed in Japan FIRST EDITION : NOV. OME-13050 ( DAMI ) CSH-23F/24F *00080818600* *00080818600* *00080818600* *OME13050F00* *OME13050F00* *OME13050F00* SAFETY INSTRUCTIONS WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock exists inside the equipment. Immediately turn off the power at the switchboard if water leaks into the equipment or something is dropped in the equipment. [. . . ] Chooses length (times range in use) of ship's track. (Continued on next page) 5-6 Menu ES/NET REC Item ES 1 Color Curve Description Selects echo level versus presentation color curve for echo sounder 1. The higher the setting the easier are weaker echoes to see on the display. Chooses "Sonde" to have ship's speed dependent advance of echo sounder picture while shooting net and "KP" to have advance synchronized with transmission. Selects width for sampling echoes along upper half of range marker in horizontal slice display. Sets angle from ship's bow for sampling echoes in PRT/STBD display. You can interlock these items with respective items on sonar connected to the CSH-23F/24F. If you interlock the range, for example, anytime the range is changed on the CSH-23F/ 24F it is automatically changed on the sonar connected and vice versa. Press MENU key to clear all user, data set and system menus settings and restore default settings on all system menus. ES 2 Color Curve Picture Advance Advance at Shoot Net Rec Picture HIST DISPLAY H-Slice Width PRT/STBD Sample INTERLOCK Tilt, Range Event Mark Fish Mark Net Shoot Mark Target Lock Defaults DEFAULTS 5-7 DATA SET Menu Description The DATA SET menu can be displayed by pressing MENU + d . For help, press the HELP key. Item Description For each of these devices you may change settings of echo level versus presentation color curve, which you selected at either "CURVE" at SIGNAL PROCESS on data setting window or system menu. First select item to change on COLOR CURVE sub menu, and then press the MENU key. Display color 15 13 11 Menu COLOR CURVE Sonar 1 Sonar 2 Echo Sounder 1 Echo Sounder 2 Level setting 255 193 104 C o l o r B a r 8 58 , , , , , , , , , , , , , , , , 4 18 0 0 128 255 Level 2. Follow the instructions on the screen. Color curve setting is completed. To cancel change and close the menu, press END key. (Continued on next page) 5-8 Menu CHANGE COLOR Item Sonar 1 Sonar 2 Echo Sounder Marks Menu Description You can customize the color of these items according to user request, etc. For display color change on Sonar 1 you can change color according to selection by COLOR key. First select item to change on CHANGE COLOR sub menu, and then press the MENU key. Before (R) (G) (B) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Display Color Before (R) (G) (G) , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , 2. Using the arrow keys, place the cursor on color segment you want to change color. If you are changing the color of marks or the menu, press the HELP key to display guidelines for changing their colors. Follow the instructions on the screen. Color curve setting is completed. To cancel change and close the menu, press END key. (Continued on next page) 5-9 Menu NET SHOOT PLAN Item Net Diameter Description Sets estimated ship's turn diameter necessary for shooting net, to get accurate depiction of net location mark, which you can display by pressing the NET COURSE key. When you lower the tilt angle the on-screen net location mark enlarges. When the tilt angle is 45° the diameter of the on-screen net is 2 R meters. ) Sets number of net sonde transmitters and their distances between each other. The movement of the net during net shooting is plotted by using water current speed and direction fed from external sensor. The external sensor feeds that data for three depths (layers), thus net movement will be different at each layer. [. . . ] DISPLAY (1) Picture Display CSH-23F: PPI display on 15 inch non-glare, high-resolution color CRT CSH-24F: PPI display on 21 inch non-glare, high-resolution color CRT 16 colors (sonar picture), 4 colors (marks) a) Normal Mode (*with or without data display) b) Off-center c) Echo sounder combination (normal plus echo sounder) d) Audio combination e) Port/ starboard combination f) Horizontal slice combination g) Target slice h) True motion* Own ship mark, heading mark, range rings, range/bearing mark, trackball mark, event mark, net shooting mark, fish mark, estimate mark, bearing scale, north mark*, ship's track*, current mark*, net sonde mark*, target lock mark* Sonar picture (range, tilt angle, gain), Trackball mark data (slant range, horizontal range, depth, bearing), Event mark data (horizontal range, depth, first event-marked depth, bearing), Fish mark data (distance moved*, direction* and speed* between two latest fish marks), Estimate mark data (estimation of fish volume by echo strength), Net shooting data (time and distance run* between turning on and off of net shooting mark), Setting change data (new setting appears in larger characters for 5 seconds when changed), Current data* (current speed, direction, layer, depth), (2) Color (3) Display Mode (4) Display Marks (5) Alphanumeric Data SP-2 Navigation data *(ship's speed, heading, water depth, water temperature), Own ship's position *(latitude/longitude), Net sonde data *(net depth, distance to seabed, water temperature, sinking speed of net) (6) Features Custom mode, interference rejector, afterglow, noise limiter, delete color, memory card (save and recall of picture, echo inside estimate mark and net shooting data), automatic tilt, automatic target tracking, *(target lock), external KP sync, heading up, north up*, fish alarm, overvoltage warning, unretracted transducer warning, remote control *: External sensor required. 3. HULL UNIT 1200 mm Travel XDCR Travel Raising Time Lowering Time Driving System Allowable ship's speed 800 mm/1200 mm 22 sec (for 1200 mm travel) 20 sec (for 1200 mm travel) Remote electric control 18 knots (15 knots during raise/lower operation) 15 knots (12 knots during raise/lower operation) 1600 mm Travel 1600 mm/1200 mm 28 sec (for 1600 mm travel) 25 sec (for 1600 mm travel) SP-3 This page is intentionally left blank. INDEX A AGC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 2AGC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 N Nav Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]