User manual FURUNO 1834C Operators Guide

[. . . ] Trackball Shifts EBL/VRM and cursor; selects menu items and options. Radar: Displays the soft keys for adjustment of gain, A/C SEA, A/C RAIN. Momentary press: Turns the power on, and shows D: RADAR STBY/TX soft key. Push: Registers setting. May also be used to enter alphanumeric data. Turning the Power On/Off Turning on the power Press the POWER/TX key momentary. [. . . ] For manual adjustment, rotate the ENTER knob to adjust, while observing the radar echo. Press the GAIN key or the E: RETURN soft key to finish. 2. To erase an EBL, press appropriate EBL soft key (A or D) followed by the CLEAR key. 12/LP 3nm H-UP 319. 9°M EBL VRM A EBL1 ON VRM1 ON Adjusting the A/C SEA, RAIN 1. Press the GAIN key followed by B: A/C SEA or C: A/C RAIN soft key to show the appropriate setting window. A/C SEA AUTO ROUGH AUTO MODERATE AUTO CALM 0 MAN EBL1 (Dotted) VRM2 (Dashed) VRM1 (Dotted) EBL2 (Dashed) EBL1 B C OFFSET D EBL2 ON E VRM2 ON 330. 1°R 3. 123nm EBL2 VRM2 234. 1°R 9. 343nm EBL1 bearing/ VRM1 range VRM1 + 359. 9 °R 11. 70nm A/C RAIN 0 Active marker is highlighted. EBL2 bearing/ VRM2 range A/C SEA window A/C RAIN window 2 <PLOTTER Operation> Changing Chart Scale Press the RANGE - key (shrinks the scale, and expands image) or RANGE + key (expands the scale, and shrinks image). ROUTE NAME NEW ROUTE A 001 COMMENT PLOT B LOCAL LIST C ALPHA LIST D CONECT Entering a Mark 1. 4. E CANCEL Entering a Waypoint at Own Ship Position Press the SAVE/MOB key momentarily to store your position as a waypoint. 5. 6. Press the B: LOCAL LIST or C: ALPHA LIST soft key to open the waypoint list. Use the trackball to select a waypoint, then press the A: ADD WPT soft key. Press the D: SAVE soft key to register the route, and then press the MENU key. Navigating to Waypoints Entering a Waypoint with Cursor 1. Press the MENU key, C: WAYPOINTS/ROUTES, A: WAYPOINTS and C: WAYPOINT BY CURSOR soft keys in order to show the plotter display. Operate the trackball to place the cursor where you want to enter a waypoint. Press the D: NEW WAYPOINT soft key. MARK NAME 34°44. 000'N 135°21. 000'W NEW WPT 1. 2. Operate the trackball to select a waypoint on the plotter display. Press the A: EDIT soft key to show the arrival alarm window. ARRIVAL ALARM 2. 3. 0 0 1 W 359. 9° PT 0. 00nm 00:00 01JAN00 359. 9° 0. 00nm v A SELECT MARK COORD TYPE v COMMENT 002WPT 02:36 01JAN01 34°44. 000'N 135°21. 000'W LAT LON B ¡ ON 0. 010nm ¤ OFF w 134° 12. 5. 34°44. 000'N 359. 9° 135°21. 000'W 0. 00nm PROXIMITY ALARM RADIUS 0. [. . . ] Use the trackball to select the alarm among BOTTOM, TEMPERATURE, FISH and FISH (B/L). Select ON (for TEMPERATURE, WITHIN RANGE or OUT OF RANGE), and then key in the alarm range. Press the C: ENTER soft key (or ENTER key) followed by the ALARM key to close the menu. Automatic Sounder Operation 2. [. . . ]