User manual FURUNO 1724C Operators Guide

[. . . ] (9) Momentary press: Registers own ship's position as a waypoint. (10) Shows or hides the soft keys, function ·@ keys, nav data alternately. (11) Soft keys (A) Cursor pad Chooses menu items and options; shifts cursor. [. . . ] Rotate the ENTER knob to bisect the radar target with the EBL, and read the EBL indication to find bearing. To erase an EBL, press appropriate EBL soft key followed by the CLEAR key. . 125nm . 250/SP 3. Press the cursor pad to select AUTO ROUGH, AUTO MODERATE, AUTO CALM or MAN (manual) as appropriate. For manual adjustment, rotate the ENTER knob to adjust, while observing the radar echo. Press the GAIN key or the RETURN soft key to finish. H-UP 319. 9°M EBL VRM EBL1 ON 1 3 4 2 VRM1 ON OFFSET EBL2 ON VRM2 ON Adjusting the A/C SEA, RAIN 1. Press the GAIN key followed by A/C SEA or A/C RAIN soft key to open the appropriate setting window. A/C SEA AUTO ROUGH AUTO MODERATE AUTO CALM 0 MAN A/C SEA window 5 EBL1 VRM1 334. 3°R 0. 119nm EBL2 VRM2 236. 5°R 0. 242nm + 359. 9°R 0. 240nm 6 7 A/C RAIN 0 A/C RAIN window 2. When choosing MAN, rotate the ENTER knob to adjust to suppress sea clutter. (1) (2) (3) (4) (5) (6) (7) EBL1 (Dotted line) EBL2 (Dashed line) VRM1 (Dotted ring) VRM2 (Dashed ring) EBL bearing VRM range Active marker is highlighted. 2 <PL OTTER Operation> 2. Press the NEW ROUTE soft key to open the new route entry screen. ROUTE NAME Changing Chart Scale Press the RANGE - key (shrinks the scale, and expands image) or RANGE + key (expands the scale, and shrinks image). 001 COMMENT NEW ROUTE PLOT LOCAL LIST ALPHA LIST Entering a Mark 1. Press the MARK ENTRY soft key. CONECT CANCEL Entering a Waypoint at Own Ship Position Press the SAVE/MOB key momentarily to store your position as a waypoint. Entering a Waypoint with Cursor 1. Press the MENU key, WAYPOINTS/ROUTES, WAYPOINTS and WAYPOINT BY CURSOR soft keys in order to open the plotter display. Press the cursor pad to place the cursor where you want to enter a waypoint. Press the NEW WAYPOINT soft key. MARK NAME 34°44. 000'N 135°21. 000'W NEW WPT SELECT MARK COORD TYPE 3. Press the LOCAL LIST or ALPHA LIST soft key to open the waypoint list. Press the cursor pad to select a waypoint, then press the ADD WPT soft key. Press the SAVE soft key to register the route, and then press the MENU key. Navigating to Waypoints 1. Press the EDIT soft key to open the arrival alarm window. ARRIVAL ALARM 0 0 1 W 359. 9° PT 0. 00nm 00:00 01JAN00 359. 9° 0. 00nm 4. [. . . ] Press the RETURN soft key to close the window. Activating Sounder Alarms 1. Press the cursor pad to choose the alarm among BOTTOM, TEMPERATURE, FISH and FISH (B/L). Choose ON (for TEMPERATURE, WITHIN RANGE or OUT OF RANGE), and then key in the alarm range. [. . . ]