User manual FUNAI W3913LCV

[. . . ] CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. [. . . ] In this case, refer to "USING THE TITLE MENU". setting, and then press the ENTER button. 5 Press the STOP button to stop play. 3 Playback will start from the selected title. ­ 13 ­ EN 1A23 USING THE TITLE MENU DVD With a DVD containing a title menu, you can select desired titles from the menu. RESUMING PLAYBACK FROM THE POINT WHERE PLAYBACK STOPPED DVD CD 1 Press the STOP button during playback. ¡Playback will stop, and then appear the resuming message at the center. 2 Select the desired title. ¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button. Press 'PLAY' to play from here. To play the beginning, press 'STOP' first and then 'PLAY'. CALLING UP A MENU SCREEN DURING PLAYBACK For DVDs ¡Press the MENU button to call up the DVD menu. ¡Press the TITLE button to call up the title menu. 2 Press the PLAY button. Playback will start from the point where the previous playback session was stopped. B Note ¡Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details. Note ¡The resume function can be reset by pressing the STOP button twice or by opening the disc loading tray. PAUSING PLAYBACK OR DISPLAYING A STILL PICTURE DVD CD STEPPING THROUGH FRAMES DVD 1 Press the PAUSE button while playback is paused. ¡The next picture frame is disF 1 Press the PAUSE button during playback. ¡Playback will pause, with sound F muted. played with sound muted each time the button is pressed. 2 Press the PLAY button to resume playback. B 2 Press the PLAY button to resume playback. B ­ 14 ­ EN 1A23 FAST FORWARD/REVERSE DVD CD STARTING FROM A DESIRED TRACK CD 1 Press the numeric buttons to enter the desired track number. ¡The selected track will be located, and playback will start. 1 Press the FWD g or REV h button during playback. ¡For DVDs, pressing the FWD g or REV h but- ton cycles the playback speed in four steps. ¡For audio CDs, the playback speed is ×16 fixed. REV E Button Ex2 FWD D Button Dx2 Ex8 Dx8 You can also press the SEARCH MODE button, use the numeric buttons to enter the track number. When the track number is entered in the entry box, playback of the desired track will start automatically. ¡The selected section will be REPEAT [TITLE] played back repeatedly. REPEAT [A-B] For audio CDs ¡The whole disc or a single track is played back 3 To exit A-B repeat playback, press the A-B REPEAT button and set it to OFF. REPEAT [ OFF ] repeatedly. ¡Pressing the REPEAT button cycles the display on the screen through Off, Track and All. Notes REPEAT [OFF] No repeat playback. ¡With DVDs, the A-B repeat section can be set only within the current title. REPEAT [TRACK] The current Track is played back repeatedly. The whole Disc is played back repeatedly. ¡With audio CDs, the A-B repeat section can be set within the current track. ¡A-B repeat is not available with some scenes in REPEAT [ALL] DVD. ¡To cancel the A point which was set, press the CLEAR button. ¡A-B repeat playback is not function during title, If the REPEAT button is pressed once during program/random playback, the current track is played back repeatedly. If the REPEAT button is pressed again, the program/random playback is performed repeatedly. ¡The REPEAT setting will be cleared when moving chapter, track or all repeat playback had set. to other title, chapter or track. ¡Repeat playback is not function during A-B repeat playback. ­ 17 ­ EN 1A23 PROGRAM (Audio CD) CD 1 Press the MODE button in stop mode. ¡The program screen will appear. ZOOM PLAYBACK (enlargement on-screen) DVD Images can be enlarged on the screen to your taste. 1 Press the ZOOM button during playback. PROGRAM TIME 0:00:00 1/1 ¡An image will be enlarged at the center of the -- screen. ¡Pressing the ZOOM button cycles the zooming DELETE: CLEAR EXIT: RETURN START: PLAY RANDOM: MODE images in two steps. ZOOM [x2] ZOOM [x4] ZOOM [OFF] 2 Press the numeric buttons to enter the desired track numbers. ¡50 programs can be displayed PROGRAM TIME 2:07:43 1/1 at once on the screen. Press "L" to go to the next page. 02 05 07 04 10 14 06 15 21 08 20 28 10 25 35 12 30 42 11 34 49 16 40 58 18 45 63 01 03 _ START: PLAY RANDOM: MODE DELETE: CLEAR EXIT: RETURN 2 When the cursor (K/ L/s / B) button is pressed during zoom play, the part to be zoomed moves. ¡The zooming frame can be moved from the center 3 Press the PLAY button. ¡Playback will start in the programmed order. The frames will move 6 steps when 4 time zooming. ¡Current position will be displayed on the right-bot- button works as follows. ¡Press the STOP button once and then the PLAY button again, playback will restart from the point where the STOP button was pressed. (Program continued) ¡Press the STOP button twice and then the PLAY button again, playback will restart from the track in the usual way. [. . . ] Botones de flechas Utilícelos cuando haga ajustes mientras ve la visualización en una pantalla de televisión. Botón de avance (FWD) Hace que la reproducción avance rápidamente hasta un punto deseado. EN 1A23 ­ 32 ­ VISTA TRASERA Y Cr R L COAXIAL AUDIO OUT VIDEO OUT Cb S-VIDEO OUT 31 32 33 34 35 36 37 34. Toma de salida de audio izquierda (AUDIO OUT) Toma de salida de vídeo (VIDEO OUT) Tomas de salida de vídeo componente Toma de salida de vídeo S (S-VIDEO OUT) 31. [. . . ]