User manual FUNAI SV206G

[. . . ] . 77 80 84 88 92 95 Before Using 1 Before Using In this section Important Safeguards Precautions Information on digital broadcasting Major features of STB Location of controls Accessories Installing batteries Reference to SETUP menu 1 Before Using 3 This section consists of important things, including safety guidelines, that you should know before using STB. Be sure to read this section carefully before attempting to setup your STB. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. [. . . ] YEAR DATE TIME 2001 -------- or SET NOTE : Refer to "INFORMATION on Time Zone " on page 72. SETUP WIZARD 5/8 Enter current time. YEAR DATE TIME 2001 12 10 13 THU 30 PM SET NOTE: After all information is entered, the cursor will move to SET. TIP: To enter the YEAR, enter the last 2 digits of the year. (e. g. , Enter "03" using number buttons; 2003 will be shown. ) 32 Initial Setups (Setup Wizard) 9 Press ENTER when the cursor is on SET. · · Your settings will be activated. SETUP WIZARD 6/8 will appear, then STB will start searching channels with Automatic Clock Adjustments to keep the time correct. 10 Select the desired channel to search from the channel map using o / p navigation buttons. SETUP WIZARD 6/8 Select a channel for auto clock setting. 3 4 7 10 34 3 4 5 6 7 3 Initial Setups (Setup Wizard) 48 52 NOTE: The channel numbers with clock data will become black in the channel map. NOTE: : Indicates that there are more channels above or below. : Indicates the top or bottom of the channel map. 33 Initial Setups (Setup Wizard) When not using the auto-clock setting: Select OFF on the channel map, then press ENTER. CLOCK 12 Select the desired screen ratio using o / p navigation buttons, then press ENTER. · SETUP WIZARD 8/8 will appear. Select a channel for auto clock setting. 3 4 7 10 34 OFF 2 3 4 5 48 52 SETUP WIZARD 8/8 TIP: OFF is located at the top of the channel map. LETTERBOX 11 Press ENTER. · ZOOM SETUP WIZARD 7/8 will appear. FULL NOTE: Refer to "Selecting screen formats" on page 64 for further information. SETUP WIZARD 7/8 Select screen ratio. 16:9 4:3 34 Initial Setups (Setup Wizard) 13 Select the desired display mode using o / p navigation buttons, then press ENTER. · SETUP WIZARD is completed. STB will now start receiving broadcasts. World News 25 WWOR ENGLISH STEREO 26-1 3 Initial Setups (Setup Wizard) NOTE: Refer to "Selecting screen formats" on page 64 for further information. 35 - MEMO - 36 Basic Operation 4 Basic Operation In this section Watching TV Channel banner Choosing audio and language Picture Still On screen messages You can find the basic operation to enjoy your STB in this section. This section contains some convenient information when watching TV program, for example, sub-channles on the digital channels and channel banner. EPG is the electronic equivalent of a printed television program guide. You can view a list of programs scheduled for from the next few hours up to the next seven days. NOTE: 1 Press EPG button while watching TV. · EPG will appear on the screen. Remote: Screen: EPG TODAY (THU) 22- 0 23- 0 26- 1 26- 2 55- 1 58- 0 NTSC 22-0 EPG not provided. NTSC NTSC WWOR WPIX 3:00PM CURRENT TIME: For displaying EPG, you will need to set TIME ZONE, DST, and MANUAL of CLOCK in SETUP WIZARD or in SETUP menu. 1 / 31 (THU) 3 : 03PM 4:00PM EPG not provided. State of the Union Smallville WB11 news at Ten EPG not provided. No description provided. 4 3 1, 4 2 NOTE: Refer to Components of Electronic Program Guide (EPG) for details on page 50. 48 Advanced Operation 2 Select the desired program using o / p / s / B navigation buttons. · 3 Press ENTER. When selecting a program being broadcast: · The selected program will appear. The cursor will move as you press any navigation button. State the Union EPG TODAY (THU) 22- 0 23- 0 26- 1 26- 2 55- 1 58- 0 NTSC 26-1 EPG not provided. NTSC NTSC WWOR WPIX 3:00PM CURRENT TIME: WWOR 1 / 31 (THU) 3 : 03PM 4:00PM ENGLISH STEREO 26-1 EPG not provided. State of the Union Smallville WB11 news at Ten State of the Union 3:00PM-5:00PM NONE President Georgy W. Bush addresses Congress and the nation; Minority Leader Richard Gephardt gives the Democratic response. When viewing EPG for the next two hours up to the next seven days: Press B navigation button. · When clearing EPG: Press EPG or PREVIOUS. The program previously watched will appear. EPG for the next two hours will appear. NOTE: or By pressing B navigation button, EPG will move ahead. 5 Advanced Operation When going back to the previous page: Press s navigation button. · EPG not provided. MONAURAL 22-0 The previous page of EPG will appear. NOTE: By pressing s navigation button, EPG will move back. 49 Advanced Operation Components of Electronic Program Guide (EPG) Current bar : Indicates the current time (so you can see how close you are to the start or end time of the program). EPG Day of broadcasting TODAY (THU) 22- 0 23- 0 NTSC NTSC WWOR WPIX WCBSDT 3:00PM CURRENT TIME: 1 / 31 (THU) 3 : 01PM 4:00PM Current time EPG not provided. State of the Union Smallville WB11 News at Ten Matlock Program list Channel numbers and digital broadcasting station : * "NTSC" programs are from NTSC service. 26- 1 26- 2 26- 3 55- 1 Cursor : Highlights the program currently selected. 26-2 Program viewing : Shows the program being broadcast on the channel you are choosing. WB11 News at Ten 4:00PM-5:00PM Tong, Watkins. G Program information : Indicates the Information of the program currently highlighted. NOTE 2: For channel numbers with blanked description, the broadcasting station may not provide signals for EPG. NOTE 1: Descriptions for programs from NTSC are always EPG not provided. Information icons LOCK: Indicates that the current program is blocked according to your V-CHIP setting. CC (Closed Caption): Indicates that the program being broadcast is available with closed captioning. 50 Advanced Operation Setup menu for preference includes: · · · ADD / DELETE: You can add or delete channels in the channel map. ANTENNA: You can verify and adjust the signal strength of each channel to get a clearer picture. AUTOSCAN: You can get available channels automatically into the channel map by completing AUTOSCAN. includes: · · SCREEN RATIO: You can fit the screen ratio to your TV screen. DISPLAY MODE: You can choose the display mode as you prefer. includes: · · · · Daylight Saving Time (DST): You can set the Daylight Savings Time (DST). TIME ZONE: You can set the time zone. MANUAL: You can set the clock manually. AUTO: You can adjust the clock automatically using the channel clock data included in the signal from digital broadcast sources. 5 Advanced Operation includes: · · V-CHIP/ CC: You can make some settings for V-CHIP and closed caption including your won password. MENU LANGUAGE: You can choose the language you prefer for the screen menu. 51 Advanced Operation E. g. , When adding the digital channel 26-1. Adding channels 1 Press SETUP to display SETUP menu. ADD/ DELETE You can add channels in the channel map. [. . . ] 3 Botón ENTER: En el menú SETUP, presione este botón para registrar la opción seleccionada. Instalación de las pilas 1 Quite la tapa del compartimiento de las pilas, situada en la parte posterior del mando a distancia. NOTA: Al cambiar las pilas, asegúrese de reemplazar las dos pilas al mismo tiempo. 3 Coloque la tapa del compartimiento de las pilas. PRECAUCIÓN: 2 Instale dos pilas AA, asegurándose de que la polaridad (+ / -) de las mismas sea correcta. · · No utilice simultáneamente pilas de distinto tipo. (alcalinas y de manganeso) No recargue, cortocircuite, caliente, queme ni desarme las pilas. 103 Guía para rápida consulta Conexiones de antena Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB. Conexión del STB a la antena NOTA: La antena y el cable de antena no vienen incluidos con el producto. A la antena Panel trasero del STB AL CONECTAR EL EQUIPO A UNA CAJA PARA CABLE: Señales de televisión por cable entrantes CAJA PARA CABLE NOTA: La antena, el cable de antena y la caja para cable no vienen incluidos con el equipo. A la antena ANT IN ANT OUT Toma TV ANT-IN Cable de antena STB ANT. IN Para la conexión al televisor, consulte las páginas siguientes. 1 Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB. NOTA: Para la conexión al televisor, consulte las páginas siguientes. 2 Use un cable entrante para realizar la conexión a la toma de entrada de antena de la caja para cable. [. . . ]