User manual FUNAI MX-210D

[. . . ] Hold the player with other fingers at the same time. 3. Move the back cabinet downward to detach it from the player. 7 8 Installing batteries (For MX-125D and MX-225D only) Installing batteries Installing batteries for MX-110D / 210D 4. Wrong battery installation will cause the player damage. 1. Press and hold the two sides of the player body with one hand, and press and push down the battery cabinet with alternate thumb. Install the back cabinet by aligning it to the player and then the latch. 9 10 Installing batteries (For MX-110D and MX-210D only) Changing panel (For MX-125D and MX-225D only) Please power off the player and tear off the protective membrane before changing the front panel. 2. Install new batteries in the battery compartment. Wrong battery installation will cause the player damage. 1. Hold the player with one hand and press and hold the front cabinet Open latch (p. 5) with the thumb of another hand. [. . . ] Press A B button again to mark the end of sequence, and the symbol if A B will appear on the LCD screen. Press AB button again to cancel repeat AB. 39 40 Recording and playing back voice files Switch modePress Mode once to launch main menu to select other mode. 33) Recording and playing back voice files Playing back a voice fileSelect the file and press the Scroll button once to start playing. The player will start recording whenever you press the REC button, except in File or Setup mode. Selecting the previous voice filePush the Scroll button backward (to the left) to start playing the voice file from the beginning and push again to skip to the previous voice file. Selecting next voice filePush Scroll button forward (to the right) to skip. Press Scroll button to pause recording and press again to resume recording. The player will automatically save the recording file in the VOICE directory. V001, V002, V003, etc. 41 42 Listening to FM channels The earphone is the antenna of FM radio in the player, thus insert the earphone previously otherwise FM channels will not be found/searched. There are two kinds of FM band, one is US/Europe Band (87MHz~108MHz) and the other is Japanese Band (76MHz~91MHz). Just press and hold the MODE button in FM mode to switch the two modes. When the player is in Japanese Band, the display on the player will show "JPN", if it's in US/Europe Band, "JPN" will be disappeared. Listening to FM channels Auto search: When you push once Scroll button forward (to the right) or backward (to the left), the player will automatically search the next or previous FM frequency with stronger signal. or Frequency adjustment: Press and hold Scroll button forward (to the right) or backward (to the left), you can adjust the FM frequency rapidly. There are 20 FM channels can be stored in the player. Press the Scroll button once will skip to next FM channel (CH01~CH20). The player will automatically save the frequency to the current FM channel before skip to other channel. or or Frequency fine tuning: If you want to increase the frequency with 0. 1MHz, push and hold Scroll button forward (to the right) or backward (to the left), and release Scroll button, push once Scroll button forward (to the right); If you want to decrease 0. 1MHz, push once Scroll button backward (to the left). 43 44 Recording an FM program File management Selecting a functionAfter entering the File mode, select a function with the Scroll button: DELETE, FILE SEND and RECEIVE. Press Scroll button to confirm selection as shown in the picture below. Recording an FM program If you like the FM program you are listening to, you can record it on the player. Press REC button again to stop recording as shown in the picture below. After recording When the recording is completed, the player will stay in FM mode. If you want to listen to the recorded program, press Mode button to switch to Music mode. F###. WAV, to start playing it back DELETESelect DELETE to launch to the delete screen. Scroll the Scroll button up (left) and down (right) to select the file you want to delete. If you want to abort deletion, wait for a while, the player will return to the menu automatically as shown in the picture below or press MODE button to exit. 45 46 File management Setup You can personalize your player from Setup. Items in the Setup may vary from one firmware version to another. Setup Items: Refer to Connecting your player with another player (p. 34) for details about FILE SEND and RECEIVE. 47 48 Setup Setting up the player In Setup mode, scroll the Scroll button up (left) and down (right) to select an item. Press Scroll button to confirm selection and launch to the submenu of the selected item. Setup EQ Includes NORMAL, ROCK, JAZZ, CLASSICAL, POP, U. BASS, BLUES, CLUB, DANCE, FULL BT, FULL TRE, L. HALL, LIVE, PARTY, REGGAE, SKA, SOFT, S. ROCK, and TECHNO. After launching to the submenu of the selected item, personalize the settings. Press Scroll button once to save changes. REC. TYPE You can select different sampling rates to suit your demands. The lower the sampling rate, the poorer the recording quality, but the recording time is longer. The player offers the following 7 sampling rates: 48KHz (192Kbps), 44KHz (176Kbps), 32KHz (128Kbps), 22KHz (88Kbps), 16KHz (64Kbps), 11KHz (44Kbps), and 8KHz (32Kbps). LANGUAGE The player supports file names and ID3 tag information in over 40 languages and offers user interface in 10 different languages, including English, Traditional Chinese, Simplified Chinese, Japanese, Korean, Russian, Spanish, Germany, French and Italian. [. . . ] This device must accept any interference received, including interference that my cause undesired operation. If your device needs repairs, you must arrange for the manufacturer to make them if you are to keep the device's FCC registration valid. This equipment, like other electronic equipment, generates and uses radio frequency energy. If not installed and used according to the instructions in this manual, this equipment cause interference with your radio and television reception. [. . . ]