User manual FUNAI LC-940

[. . . ] (c) Damage occurred or costs incurred in the shipping of the product to Wal-Mart Canada. (d) Ordinary adjustments to the product which can be performed by customer as outlined in the ownerÕs manual. (e) Signal reception problems caused by external antenna, cable systems or interference. (f) Incompatibility due to the change in TV/CATV broadcast systems after the product was sold. [. . . ] Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. When the TV exhibits a distinct change in performance-this indicates a need for service. Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. NOTE: The S-VIDEO jack on the rear panel is given priority over the VIDEO1 jack. Press the VOL(ume) or button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu. ADD/DELETE AUTO MEMO MTS (Multi-Channel Television Sound) System You can listen to a program in MTS stereo by following the steps below. Menu Selection Type of broadcast Regular Stereo broadcast SAP MAIN -NoneSTEREO MAIN MONO -NoneMONO MAIN SAP -NoneSTEREO SAP CHANNEL PRESETTING NOTE:You MUST PRESET channels BEFORE using CHANNEL or button. To preset a channel or to change a preset channel, follow the procedure below. PICTURE 2) Press the MENU button so that the menu display appears CHANNEL SET [ENGLISH]FRANÇAIS on the TV screen. V-CHIP SET UP 3) Press the CH(annel) or button to point to "CHANNEL SET". ADD/DELETE AUTO MEMO The tuner scans and memorizes all active channels in your area. The TV distinguishes between standard TV channels and cable (CATV) channels. When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen. When you press the CH(annel) or button after selecting AUTO MEMO, the tuner will stop at the memorized channels only. The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better. [. . . ] When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically. <Rating Category Explanations> General Audience Parental Guidance suggested. Unsuitable for children under 13 Restricted; under 17 requires accompanying parent or adult guardian No one under 17 admitted Mature audience only BG PG PG-13 R NC-17 X [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] When you select the rating category and turn it to [BLOCK], the higher rating will turn [BLOCK] automatically. When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically. When you turn "X" to [VIEW], then all ratings will turn to [VIEW] automatically. [. . . ]