User manual FUNAI FDRV90E

[. . . ] If you need additional operating assistance after reading this owner's manual or to order replacement accessories, please call TOLL FREE : 1-800-605-8453 or visit our web site at http://www. To record a program easily, refer to "Easy DVD recording" on pages 16-17 after connections are completed. (You CANNOT record on any copyright protected DVD disc with this unit. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Remember: If your cable box or satellite box is connected as in "Connection A" on page 14, TV Channel number must be channel 3 or 4 for every a guide channel number. Then, set your cable box or satellite box to the channel you want to record; leave your cable box or satellite box on for the timer recording. Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear). When you want to record to a tape, use either DVD/VCR VIDEO IN jack (Rear) or VIDEO input jack (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. Front of this unit Select "SETUP" using { / B buttons, then press ENTER button. Select "Select Video" using K / L / { / B buttons, then press ENTER button. Select "SETUP" using { / B buttons, then press ENTER button. Select "Select Video" using K / L / { / B buttons, then press ENTER button. Select "L2 (Front)" using K / L buttons, then press ENTER button. Select "L1 (Rear)" using K / L buttons, then press ENTER button. Select the input jack type to connect using K / L buttons, then press ENTER button. If you want to use VIDEO input (Composite), select "Video In". Select the input jack type to connect using K / L buttons, then press ENTER button. Before recording from an external source, see the instructions for the connection on page 40. Turn the TV and the unit on, and be sure to select the input of the TV to which the unit is connected. When you want to record to the disc: Press: Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. When you want to record to a tape: Press: Insert the tape with a record tab into the cassette compartment. To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or the CH K / L buttons. To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or the CH K / L buttons. Select "SETUP" using { / B buttons, then press ENTER button. You can copy a DVD disc to a videotape or copy a videotape to a DVD disc. [. . . ] PCM (Pulse Code Modulation) The most common system of encoding digital audio, found on CDs and DAT. excellent quality , but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. Playlist From this list you can play contents of a disc as your desired order or in sequence. [. . . ]