User manual FUNAI F3809B

[. . . ] 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. [. . . ] *4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs. Even if they are played back, the sound or video quality will be compromised. *6: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD recorder. However, depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth, etc. ). *7: Only the discs recorded in the video format and finalized can be played back. Depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth, etc. ). *8: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may not play back properly. *10: The number inside the symbol refers to a region of the world and a disc encoded in a specific region format can only be played back on unit with the same region code. :This label indicates playback compatibility with DVD-RW discs recorded in VR mode (Video Recording Format) NOTE: · This player cannot play the DVD-RW that supports CPRM (Contents Protection for Recordable Media). · This player cannot play the DVD-R discs recorded in VR mode (Video Recording Format). UNPLAYABLE DISCS NEVER play back the following discs. DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3 ¡ On the following disc, the sound MAY NOT be heard. ¡For DVDs, fast forward/reverse search speed is dif- celled. PAUSE DVD-V 1 During playback, hit [PAUSE F]. ¡Playback will pause and sound will be muted. ferent depending on the disc. Approximate speed is 1 (×2), 2 (×8), 3 (×50) and 4 (×100). ¡When you press buttons on the front panel, press and hold [SEARCH h / g] for a few seconds. CD 3 To return to normal playback, hit [PLAY B]. 2 To continue playback, hit [PLAY B]. SLOW FORWARD / SLOW REVERSE DVD-V 1 During playback, hit [PAUSE F]. 2 Press [g] or [h ]. ¡" STEP BY STEP PLAYBACK DVD-V 1 During playback, hit [PAUSE F]. ¡Playback will pause and sound will be muted. 1" or " 1" appears on the screen. 3 To select another speed, repeat step 2 until your required speed appears on the screen. ¡Slow forward or reverse speed varies with the disc. 2 The disc goes forward by one frame each time [PAUSE F] is pressed. Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2). ¡When you press buttons on the front panel, press 3 To exit step by step playback, hit [PLAY B]. and hold [SEARCH h / g] for a few seconds. 4 To return to normal playback, hit [PLAY B]. ­ 21 ­ EN SEARCH FUNCTION TRACK SEARCH CD There are three ways to begin playback on an Audio CD at a specific track. Using the Number buttons on the remote control TIME SEARCH DVD-V CD 1 During playback, hit [SEARCH MODE] three times (CD: twice) to display the Time Search on the TV screen. 1 Press the Number buttons to enter the desired track number. ¡For single digit tracks (1-9), press a single number 2 Within 30 seconds, enter a desired disc time using the Number buttons. track 3, hit [3]). ¡To play track 26, hit [+10], [2], [6]. Using [SEARCH MODE] appears automatically. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the track or title is less than 10 minutes. 1 Hit [SEARCH MODE]. 2 Within 30 seconds, select a desired track number using the Number buttons. ¡For single digits hit [0] first, if the total track of the MARKER SETUP SCREEN DVD-V CD disc is more than 10. [. . . ] · Cuando se activa AUTOPROGRAMACION DE CA, donde no hay entrada de señal del televisor, aparecerá "NO HAY SEÑAL DE TV" en la pantalla después de terminar la búsqueda de canales. · La unidad puede reconocer los canales de TV de cable para que sean canales de TV de antena con las condiciones de recepción. En este caso, pruebe nuevamente con el prefijado automático en las condiciones de recepción fina. · La programación de canal en memoria NO es necesario cuando conectado a una caja de cable o caja de satélite. [. . . ]