User manual FUNAI F2860M

[. . . ] CAUTION: CAUTION: LOCATION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. INSIDE, NEAR THE DECK MECHANISM. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. [. . . ] (Refer to pages 14-15) · The audio source on a disc in a Dolby Digital 5. 1 channel surround format cannot be recorded as digital sound by an MD or DAT deck. · Unless connected to a Dolby Digital decoder, set "DOLBY DIGITAL" to "OFF" for the AUDIO setting in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to pages 14-15) · Set "DOLBY DIGITAL" to "OFF" for the AUDIO setting in the setup mode for connecting to an MD deck or DAT deck. (Refer to pages 14-15) · By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5. 1 channel surround sound as heard in the movie theaters. Rear Terminals AUDIO OUT jacks Connect the supplied audio cable (red/white) here through the audio in jacks of a TV or other audio equipment. AUDIO OUT DIGITAL AUDIO OUT L COAXIAL R VIDEO OUT S-VIDEO OUT S-VIDEO OUT jack Connect an optional S-Video cable here through the S-video in jack of a TV. DIGITAL AUDIO OUT COAXIAL jack Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver. VIDEO OUT jack Connect the supplied video cable (yellow) here through the TV's video in jack. ­7­ EN Setup This unit L AUDIO OUT L E596CUD. qx33 04. 11. 18 14:02 Page 8 About the Remote Control Remote Control STANDBY­ON DISPLAY OPEN/CLOSE Button Disc 2 5 8 0 3 6 9 +10 (Alphabetical order) 1 4 7 DVD-V · To select chapter or title CD · To select track directly. SEARCH MODE directly. AUDIO 1 SUBTITLE 2 5 8 0 3 6 9 ENTER · To move the cursor and 4 ANGLE determine its position. · To move the cursor and determine its position. 7 REPEAT CLEAR A-B +10 SKIP · To repeat between your A-B PAUSE chosen point A and B. a disc. · To repeat between your chosen point A and B. ANGLE SLOW · To select camera angles on · To select audio languages on · To select STEREO, PLAY REV FWD AUDIO STOP SETUP TOP MENU MENU a disc. L-CH or R-CH. MODE ENTER CLEAR V. SURR. · To cancel the point for A-B repeat. DISPLAY · To clear the markers. · To clear the numbers · To cancel the point in program input. Setup entered incorrectly. for A-B repeat. mode. · To display the current disc mode. · To display the current disc · To search forward/backward REV FWD · To begin slow forward through a disc. · To search forward/backward Installing the Batteries for the Remote Control Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. /reverse playback during the pause mode. on a disc. through a disc. MENU · To call up the Menu · To set black level on/off. · To open or close the disc · To arrange the playing MODE order or play randomly. OPEN/CLOSE tray. · To open or close the disc tray. 1 PAUSE · To pause disc playback. continue playback, [PLAY DVD-V The disc goes forward by one frame each time [PAUSE F ] is hit during the pause mode. continue playback, [PLAY Hint · Set "STILL MODE" to "FIELD" in the Display menu if pictures in the pause mode are blurred. (Refer to pages 14-15) ­9­ EN Functions E596CUD. qx33 04. 11. 18 14:02 Page 10 On-Screen Display You can check the information about the current disc by hitting [DISPLAY] on the remote control. DVD-V CD DISPLAY DISPLAY Current playback status Current playback status 1 4/12 0:03:21 - 0:02:15 T 1 11/16 0:00:00 - 0:03:30 Remaining time of the current chapter Elapsed time of the current chapter CH(Chapter): Current chapter number / Total chapters DISPLAY DISPLAY 2 4/12 0:13:45 - 0:45:40 T Remaining time of the current track Elapsed time of the current track TR(Track): Current track number / Total tracks ALL: Current track number / Total tracks Current repeat setting appears only when the repeat setting is active T: Track repeat A: All Tracks repeat A B: A-B repeat Remaining time of the entire disc Elapsed time of the entire disc 2 1/3 0:00:00 - 1:23:45 Remaining time of the current title Elapsed time of the current title DISPLAY TT(Title): Current title number / Total titles DISPLAY 3 Hint · When you are playing a disc in PROGRAM or RANDOM mode, PROGRAM (or RANDOM) will be displayed instead of 2 . 3 T L1 Layer numbers, appears only when playing a two-layered Disc L0: Layer 0 is playing L1: Layer 1 is playing Current repeat setting appears only when the repeat setting is active C: Chapter repeat / T: Title repeat / A B: A-B repeat BIT RATE: The amount of audio and video data currently being read DISPLAY 4 Functions ­ 10 ­ EN E596CUD. qx33 04. 11. 18 14:02 Page 11 Search Function Track Search CD Title / Chapter Search DVD-V Time Search DVD-V CD Using the Number buttons 1123 4 7 5 8 0 6 9 +10 /2 Using [SEARCH MODE] 1 SEARCH MODE 1 PLAY TOTAL 1:29:00 /12 SEARCH MODE ·For single digit tracks (1-9), press a single number (e. g. ·To play track 26, hit [+10], [2], [6] of the Number buttons. x1(Hit once) for the chapter search x2 (Hit twice) for the title search Hit repeatedly until the Time Search display appears. 2 5 8 0 3 6 9 TOTAL 1:29:00 2 1 4 7 2 5 8 0 3 6 9 +10 /12 2 1 4 7 Using [SEARCH MODE] 1 SEARCH MODE Within 30 seconds Within 30 seconds · If the former digits of the total time are "0", "0" is entered automatically. if you enter 5:55, "0:0-:--" will be displayed on the time search screen) /2 2 Using [SKIP H , G ] 1 1 4 7 2 5 8 0 3 6 9 SKIP /2 PLAY Current Chapter (CH) SKIP CH 1 CH 2 CH 3 CH 4 SKIP +10 Within 30 seconds Using [SKIP H , G ] 1 PLAY SKIP Current Track (TR) SKIP TR 1 TR 2 TR 3 TR 4 SKIP NOTE: ¡Depending on the disc being played, this function can also be performed by directly entering the desired chapter number with the Number buttons. Refer to the manual accompanying the disc. DVD-V CD This feature allows you to assign a specific point on a disc to be called back later. To set a marker 1 PLAY To return to the marker later 1 PLAY To e xit the marker screen 1 RETURN SEARCH MODE SEARCH MODE x repeatedly until this screen appears NOTES: ¡Opening the disc tray or turning off the power will erase all markers. ¡Selecting "AC" at step [2] in the section "To set a marker" will also erase all markers. ¡To clear a marker, select the marker to be cleared at step [2] in the section "To return to the marker later", hit [CLEAR]. x repeatedly until this screen appears 2 or 2 or 3 3 ENTER ENTER at the desired marker ·Playback will restart from the specific point which you set. ­ 11 ­ EN Functions Marker Setup E596CUD. qx33 04. 11. 18 14:02 Page 12 Repeat / Random / Programmed Playback Repeat Playback DVD-V CD Repeat A-B Playback DVD-V CD Programmed Playback CD Repeat function is available only during playback. 1 PLAY A- You may determine the order in which tracks will play. 1 PLAY A-B 1 STOP CD-DA TOTAL 0:00:00 at your desired starting point (A). REPEAT 2 Each time [REPEAT] is hit. . . DVD-V A-B MODE ENTER A-B x1 (Hit once) at your desired end point (B). 2 CD-DA TOTAL 0:08:00 CHAPTER (current chapter repeat) TITLE OFF CD ¡Point B should be in the same title or track as point A is. or 8 3:30 9 2:30 10 1:30 ALL CLEAR (current title repeat) (repeat off) ENTER 2/2 8 3:30 ¡To exit the sequence, hit [A-B]. ¡This function does not work in the other repeat modes. ENTER Up to 99 programs can be ordered TRACK ALL OFF (current track repeat) (entire disc repeat) (repeat off) Random Playback This shuffles the playing order of tracks instead of playback in the sequence. CD 3 PLAY ¡Repeat setting will be cleared when moving to another title, chapter, or track. ¡Repeat playback are not available with all discs or during repeat A-B playback. 1 STOP RANDOM CD-DA TOTAL 0:45:55 RANDOM PROGRAM --no indication-- NOTES: MODE PLAY x2 (Hit twice) 2 PLAY ¡Hit [CLEAR] at step [2] to erase the most recently entered program. ¡To erase all programs at once, select "ALL CLEAR'' and hit [ENTER] at step [2]. [. . . ] To locate your nearest MAGNAVOX Authorized Service Center or for general service procedure, please call or write to the following: FUNAI CORPORATION, INC. SERVICE CENTER 19900 Van Ness Avenue, Torrance, CA 90501 Tel :1-800-605-8610 http://www. funai-corp. com Head Office: 100 North Street, Teterboro, NJ 07608 Information PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS. ­ 18 ­ EN E596CUD. qx33 04. 11. 18 14:02 Page 19 Español 1 Conexiones 4 Reproducción DVD-V CD Si su televisor tiene tomas de entrada AUDIO/VIDEO vea la sección "Conexiones" en las páginas 6-7. En caso contrario, vea la sección "Antes de utilizar su reproductor de DVD" en la página del frente. Antes. ¡Encienda el televisor, amplificador y otros equipos conectados a esta unidad. [. . . ]