User manual FUNAI DVA-206LX

[. . . ] MICRO DVD SYSTEM DVA-206LX USER'S MANUAL Unpack Your DVD System Main unit (1) Remote control (1) 1. 5V AAA batteries (2) Main speakers (2) AM loop antenna (1) FM wire antenna (1) User's Manual (1) Video cable (1) 06LX DVA-2 TEM DVD SYS MICRO US ER NU 'S MA AL Feature List 1. Support DVD playback Support VCD / SVCD playback Support MP3 / JPEG / MPEG4 playback Support CD / CD-R / CD-RW playback Support DVD-R / DVD-RW Support DVD+R / DVD+RW Powerful output, 10Wrms X 2 Dolby Digital bit stream optical output 24 bits / 192KHz audio DAC PLL FM tuner with RDS Preset memory for AM/FM tuner, 30 stations for AM and 30 FM Video output terminals: Composite Video / S-Video / Scart Sound effects 1 Important Notice Dear Customer, Thank you for purchasing our product. Before you can enjoy using it, please read this safety information and precautions to ensure a proper use of your DVD Player. IMPORTANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "danger voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and servicing instructions. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN You can help protect the environment! [. . . ] 3 To switch between FM and AM wavebands, press TUNER on the front panel or AM/FM on the remote control again. 4 Press and hold or (-TUNING+) on the remote control until the frequency starts to change, then release. 17 Note Note If the system reaches a weak station, press or (-TUNING+) to adjust manually. To change a preset station, simply save over the previously memorized station. Press ST/MONO to set the FM Tuner audio to Stereo or Mono. Using The Radio Data System (RDS) Radio Data System Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with regular program signals. This tuner offers convenient RDS features such as station name display. RDS is available only for FM stations. Auto Scan Radio Stations 1 Long press PROGRAM on the remote control until "AUTO SAVE" after "SAVE TO--" appears on the display. It searches, and saves stations into Tuner memory between AM and FM wavebands automatically. Receiving RDS Broadcasts Simply select a station from the FM waveband, and press RDS on the remote control. If the station provides RDS services, the station name(PS) will firstly appear on the front panel display. RDS may not work properly if the station to which you are listening is not transmitting the RDS signal properly, or if the signal strength is too weak. Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Listening to the Radio 1 Press TUNER on the front panel or FUNCTION on the remote control to switch to the Tuner (AM /FM) function. The last station received is tuned in and its waveband and frequency are displayed on the front panel display. 2 To select a preset station, press I or I (-Present+) on the remote control to skip to the next or previous station. 3 To change the tuner waveband, press AM/FM on the remote control to toggle between AM and FM. Note 4 To tune in a non-preset station, press or (-TUNING+) on the remote control: To tune manually, press or (-TUNING+) repeatedly until the desired station is tuned in. To tune automatically, press and hold or (-TUNING+) for 2 seconds, it will automatically search for stations. If the system reaches a station, "Tuned" will appear on the front panel display. 5 To improve reception, relocate the supplied antennas. RDS Features RDS is a broadcasting service which allows FM stations to send additional information along with regular radio signals. The additional information is derived from the features of RDS described below. Program Service Station Name (PS) The station name is displayed automatically when a station that provides RDS service is tuned in. Adjusting Stereo/Mono If a FM station is noisy, press ST/MONO on the remote control. For those stations without stereo, pressing the ST/MONO button has no effect. Radio Text (RT) The service can show text information such as the title of a song on the display. Press RDS repeatedly to show the radio text, on condition if the station to which you are listening, provides RDS services. If the station is not transmitiing text information, "NO RT" will be displayed. [. . . ] Select the desired video using press ENTER. SLEEP TIMER SETTING SLEEP Sleep Options Use this Sleep timer to turn the system off after a certain length of time. After the Sleep timer is set, you can fall asleep to music, and ensure that the system will turn off by itself rather than play all night. 1 Press SLEEP when one of the main functions (DVD/TUNER/AUX) is selected. 2 When "SLEEP OFF" appears on the display, press the / keys repeatedly until you can select your desired length of time from 10, 20, 30, 60, 90, 120 to 150 mins. [. . . ]