User manual FUNAI 5600A

[. . . ] Follow Instructions- All operating and use instructions should be followed. Cleaning- Unplug this video product from the wall outlet before cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. Attachments- Do not use attachments not recommended by the video product manufacturer as they may cause hazards. [. . . ] Avoid places with insufficient ventilation for proper heat dissipation. Avoid locations subject to strong vibration or strong magnetic fields. ⷠDo not pull on the power cord when disconnecting it from AC wall outlet. If, by accident, water is spilled on your VCR, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. ⷠDo not put your fingers or objects into the VCR cassette holder. Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use, or other acts which infringe upon the rights of copyright owners. This product's packaging materials are recyclable and can be reused. ⷠS-VHS Quasi Playback (SQPB): This unit allows you to view a tape recorded in S-VHS format. When the VCR automatically program the tuner to scan only the channels you receive in your area, some channels may be skipped due to weak signal. You can freeze the picture on TV screen by pressing [PAUSE/STILL] during playback. ⷠUsually there will be video "noise" lines (black and white streaks or dots) on the screen. This is not a fault of the machine but is a by-product of the technology involved in producing a 2 Head VCR. You can change position of the noise lines on a still picture by pressing the PAUSE/STILL button repeatedly. ⷠAfter the VCR has been in Still mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage. FWD] at step [3] so that [OFF] appears next to "AUTO REPEAT". ⷠWhen you set the Auto repeat mode to [ON] while the Counter memory mode is ON, the VCR will exit the Counter memory mode automatically. It may be unlawful to record playback copyrighted material without the consent of the copyright owner. Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record safety tab. [. . . ] If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the PROBLEM in the left column below. Adjust tracking control for a better picture by pressing [CHANNEL ( Cannot view a tape but the · Head cleaning may be necessary. Select channel 3 or 4 at your TV, then press [VCR/TV] so that the VCR/TV indicator on the VCR comes on. TV programs cannot be seen · Make sure the power plug is connected to an AC outlet. [. . . ]