User manual FUJITSU STYLISTIC 3500

[. . . ] Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document; however, because ongoing development efforts are made to continually improve the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes herein. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited. IBM, IBM PC AT, and IBM PS/2 are registered trademarks of IBM Corporation. [. . . ] If this is the case, pressing the Suspend/Resume button will not suspend system operation as described here. (In this case, suspend mode can only be achieved using the system software). Contact your local help desk or reseller if your system configuration is not suitable. · If your system is equipped with a PC Card that allows you to connect to a wired or wireless network, you may be logged off the network after a period of inactivity while system operation is suspended. Contact your network administrator or help desk for details on log-off parameters for your network. Suspending System Operation 19 Resuming System Operation 2 To resume system operation, (from either Suspend-to-RAM or Save-to-Disk modes), press the Suspend/Resume button. · From Suspend-to-RAM mode Status lights indicate that the system state is changing. It may take up to a minute before the system returns to the On state and system operation resumes. Note that the display turns on shortly before the stylus becomes active due to the power-up sequences observed by the system. · From Save-to-Disk mode Active data is read from the hard disk drive, and the system returns to the On state after a short period of time. Note that power to several system components must be restored before system operation resumes. Allow sufficient time for system operation to resume before attempting to use the system. If your system uses Save-to-Disk mode, it will take longer to resume operation as compared to using Suspend-to-RAM mode. · Use the system as you normally would once system operation resumes. All programs resume at the point where execution stopped when system operation was suspended. Using the stylus 2 You can use the Stylistic 3500 stylus (also called a "pen") to generate and create electronic "ink", to select items, and to navigate through programs on the pen tablet. The stylus can be used like a two button mouse when used in conjunction with the right-mouse button hotpad. Programs which support handwriting recognition allow you to write characters directly on the screen with the stylus and then translate your printed text into keyboard-style input. Caution · Ensure that a screen protector is installed on the pen tablet screen before you use the stylus. The warranty does not cover a screen that is scratched as a result of not using a screen protector. Do not use substitutes that were not designed for the Stylistic 3500. 20 Using the Stylistic 3500 Pen Tablet To toggle between using the stylus for inking and using it as a mouse, click on the small pen icon in the system tray at the bottom right of the screen. Here are some hints on using the stylus similar to a two-button mouse on a desktop system: · To select an object, tap the mouse tip on the object once. · To "double-click" an object, tap twice on the object quickly. · To generate a "right mouse button single-click", tap on the hotpad icon once and then tap once on the display. [. . . ] The termination on a loop may consist of any combination of devices such that the total of the load numbers of all devices does not exceed 100. 38 Appendix Caution For safety, users should ensure that the electrical ground of the power utility, the telephone lines, and the metallic water pipes are connected together. Users should not attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician. This may be particularly important in rural areas. Avis Aux Utilisateurs Du Réseau Téléphonique Canadien L'étiquette canadienne Industrie Canada identifie l'équipement certifié. Cette certification signifie que l'équipement satisfait certaines normes de protection, d'exploitation et de sécurité des réseaux de télécommunications. [. . . ]