User manual FUJITSU P5010

[. . . ] Copyright Copyright Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. Fujitsu and the Fujitsu logo are registered trademarks and LifeBook is a trademark of Fujitsu Limited. Intel and Pentiumare registered trademarks and Centrino is a trademark of Intel Corporation or its subsidiaries in the United States and other countries. [. . . ] The folder will be set as a sharable folder, and the display of the icon for the "work. " folder will change. Setting the printer-sharing function 1. Right-click the printer for which the sharing function is to be set, and then click [Sharing] in the 7. 8. 58 W I r e l e s s L A N U s e r 's G u id e menu displayed. The property window corresponding to the selected printer will be displayed. POINT Setting the printer-sharing function when Network Setup Wizard has been executed is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the printer-sharing function without using Network Setup Wizard are laid down below. Confirming the status of the radio Intel PROSet Wireless LAN: 1. Click [Start] -> [All Programs] -> [Intel Network Adapters] -> [Intel(R) PROSet]. Click the [General] tab and confirm radio status in the window displayed. The current connection status will be displayed. 2. Signal Quality The quality of the signals is displayed on a graph. Mode If infrastructure connection is in use, "Infrastructure (AP)" will be displayed. If ad hoc connection is in use, "Ad hoc (Peer-to-peer)" will be displayed. When communication is possible, "802. 11b (2. 4 GHz)" is displayed. Channel The channel number currently being used for the communications is displayed. 3. Click the [OK] button. Confirming connection After you have finished the network setup operations, access the folder whose sharing has been set for other personal computers. Also, confirm the status of the radio waves in case of trouble such as a network connection failure. POINT In the case of infrastructure connection, enter the necessary data for the access point before confirming connection. Refer to the manual of the access point for the access point setup procedure. Connecting your personal computer to another personal computer 1. Click [View workgroup computers] under Network Tasks in the left frame. Double-click the personal computer to which your personal computer is to be connected. The folder that was specified in "Setting the file-sharing function" on page 58 will be displayed. Double-click the folder to be accessed. If connection cannot be made to the network or if you want to check for normal connection, see "Troubleshooting" on page 68. Right-click the Broadcom icon in the lower right corner of the screen. [. . . ] Shadow RAM A technique of copying data or applications stored in ROM (Read Only Memory) into RAM (Random Access Memory) for access during actual operation. RAM is much faster to access than ROM, however ROM contents are not lost when power is removed. Shadowing allows permanently stored information to be rapidly accessed. Technology that allows you to download digital audio data onto a MiniDisc recorder. [. . . ]