User manual FUJITSU N3530

[. . . ] Copyright Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. The absence of a product or service name, slogan, or logo does not constitute a waiver of any trademark or other intellectual property rights relating to that name, slogan, or logo owned by Fujitsu Computer Systems Corporation, its parent, subsidiaries, and affiliated companies. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. [. . . ] Please consult with your network administrator for these parameters: Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet for Wireless utility. Click the icon [Intel PROSet Wireless] to execute the Intel PROSet for Wireless utility. 2. From the Intel ProSet Wireless page, click the new profile name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. Click [Close] if you want to close the Intel(R) PROSet for Wireless window. address automatically]. If your network uses static IP addresses, consult with your network administrator for the correct IP address settings. Processing will return to the [Wireless Network Connection Properties] window. Following this operation, confirm the names of the computer and the workgroup as follows. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator. CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the "Setting TCP/IP" and "Confirming the computer and work group names" operations required for network connection. Setting TCP/IP To change the setting of the IP address, you need to be logged in from Windows as an administrator. 1. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click the [System] icon. The setting of [Full computer name:] denotes the name for identifying the computer. Any name can be assigned for each personal computer. To change the name, click [Change], then proceed in accordance with the instruction messages displayed on the screen. 3. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View" under Control Panel the left frame. (If you are already in Classic view, "Switch to Category View" will be displayed. ) Double-click [Network Connections]. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. The [Wireless Network Connection Properties] window will be displayed. 6. Enter the desired name in less than 15 ASCII character code format. [. . . ] Used to connect TV or cable TV antenna using the RF adapter cable included with the kit. 2 Watch television programs Pause television programs as you watch them Record television programs for later viewing Schedule programs to be automatically recorded at a later time Video Input Jack (Composite) 3 S-Video Input Port For detailed information about connecting and using the remote control device and its peripherals, refer to the manual that accompanies the remote control. For information on using Microsoft Windows XP Media Center Edition 2005, refer to the extensive on-screen help associated with the operating system. 4 Antenna Mini-Jack INTRODUCING THE TV TUNER Before using the TV tuner, make sure the following items are included. Be sure to have these items at hand before proceeding: CONNECTING THE TV TUNER If you have a TV tuner installed in your system, the TV tuner and Microsoft Windows XP Media Center Edition will work "out-of-the-box". [. . . ]